The CL1 is a recessed lensed LED ceiling luminaire containing 1 x 1.2W Osram LED.

It can be supplied in strings of 4 - 7 lights and is dimmable when connected in a group of 6 or 7 fittings. Non-dimmable or dimmable drivers with multibank connectors need to be ordered separately depending on the total number of fittings required.

Ceiling Light CL1
Cut Out Size (mm) Dim/Non Dim Plug Power (W) Luminaire Output  Beam Angle  Fitting Colour
WW (3000K) NW (4000K)
32 Non Dim  1.45  95 102 15, 67 Al, Wt, Bk
Dim  1.9
Available colours: NW WW
CRI: Min 80

The CL1-Curve is a recessed lensed LED ceiling luminaire containing 1 x 1.2W Osram LED.

It can be supplied in strings of 4 - 7 lights and is dimmable when connected in a group of 6 or 7 fittings. Non-dimmable or dimmable drivers with multibank connectors need to be ordered separately depending on the total number of fittings required.

Ceiling Light CL1-Curve
Cut Out Size (mm) Dim/Non Dim Plug Power (W) Luminaire Output  Beam Angle  Fitting Colour
WW (3000K) NW (4000K)
40 Non Dim  1.45  95 102 15, 67 Al, Wt, Bk
Dim  1.9
Available colours: NW WW
CRI: Min 80

The CL1S is a recessed lensed LED ceiling luminaire containing 1 x 1.2W Osram LED.

Each fitting is supplied with its own non-dimmable LED driver.

Ceiling Light CL1S
Cut Out Size (mm) Dim/Non Dim Plug Power (W) Luminaire Output  Beam Angle  Fitting Colour
WW (3000K) NW (4000K)
32 Non Dim  1.45  95 102 15, 67 Al, Wt, Al
Dim  N/A
Available colours: NW WW
CRI: Min 80

The CL1S-Curve is a recessed lensed LED ceiling luminaire containing 1 x 1.2W Osram LED.

Each fitting is supplied with its own non-dimmable LED driver.

Ceiling Light CL1S-Curve
Cut Out Size (mm) Dim/Non Dim Plug Power (W) Luminaire Output  Beam Angle  Fitting Colour
WW (3000K) NW (4000K)
40 Non Dim  1.45  95 102 15, 67 Al, Wt, Bk
Dim  1.9
Available colours: NW WW
CRI: Min 80

The CL6 is a recessed lensed LED ceiling luminaire containing 6 x 1.2W Osram LEDs.

It can be used as a replacement for the 35W or 50W halogen down lighter and is ideal for new or retrofit applications

Ceiling Light CL6
Cut Out Size (mm) Dim/Non Dim Plug Power (W) Luminaire Output  Beam Angle  Fitting Colour
WW (3000K) NW (4000K)
74 Non Dim  8  505 544  15, 20, 36 Wt, Al
Dim/DALI  8.7
Available colours: NW WW
CRI: Min 80

The CL7 is a recessed lensed LED ceiling luminaire containing 7 x 1.2W Osram LEDs.

It can be used as a replacement for the 35W or 50W halogen down lighter and is ideal for new or retrofit applications

Ceiling Light CL7
Cut Out Size (mm) Dim/Non Dim Plug Power (W) Luminaire Output  Beam Angle  Fitting Colour
WW (3000K) NW (4000K)
74 Non Dim 8.9 670 722  15, 20, 40  Wt, Al
Dim/DALI  9.6
Available colours: NW WW
CRI: Min 80

The CL6-Curve is a recessed lensed LED ceiling luminaire containing 6 x 1.2W Osram LEDs.

It can be used as a replacement for the 35W or 50W halogen down lighter and is ideal for new or retrofit applications

Ceiling Light CL6-Curve
Cut Out Size (mm) Dim/Non Dim Plug Power (W) Luminaire Output  Beam Angle  Fitting Colour
WW (3000K) NW (4000K)
90 Non Dim  8 505 544  15, 20, 36 Wt
Dim/DALI  8.7
Available colours: NW WW
CRI: Min 80

The CL7 Curve is a recessed lensed LED ceiling luminaire containing 7 x 1.2W Osram LEDs.

It can be used as a replacement for the 35W or 50W halogen down lighter and is ideal for new or retrofit applications

Ceiling Light CL7 Curve
Cut Out Size (mm) Dim/Non Dim Plug Power (W) Luminaire Output  Beam Angle  Fitting Colour
WW (3000K) NW (4000K)
90 Non Dim  8.9 670 722  15, 20, 40  Wt
Dim/DALI  9.6
Available colours: NW WW
CRI: Min 80

The CL4H-Diff-F is a diffused flat LED ceiling luminaire containing 4 x 2.4W Osram LEDs.

It can be used as a replacement for the 35W or 50W halogen down lighter and is ideal for new or retrofit applications where a wide beam angle and a diffused look is required.

Ceiling Light CL4H-Diff-F
Cut Out Size (mm) Dim/Non Dim Plug Power (W) Luminaire Output  Beam Angle  Fitting Colour
WW (3000K) NW (4000K)
74 Non Dim  10.8  679 710 70  Wt, Al
Dim/DALI  11.5
Available colours: NW WW
CRI: Min 80

The CL5H-Diff-F is a diffused flat LED ceiling luminaire containing 5 x 2.4W Osram LEDs.

It can be used as a replacement for the 35W or 50W halogen down lighter and is ideal for new or retrofit applications where a wide beam angle and a diffused look is required.

Ceiling Light CL5H-Diff-F
Cut Out Size (mm) Dim/Non Dim Plug Power (W) Luminaire Output  Beam Angle  Fitting Colour
WW (3000K) NW (4000K)
74 Non Dim  13.2 813 882  70  Wt, Al
Dim/DALI  13.7
Available colours: NW WW
CRI: Min 80

The CL4H-Diff-R is a diffused recessed LED ceiling luminaire containing 4 x 2.4W Osram LEDs.

It can be used as a replacement for the 35W or 50W halogen down lighter and is ideal for new or retrofit applications where a wide angle and a diffused look is required.

Ceiling Light CL4H-Diff-R
Cut Out Size (mm) Dim/Non Dim Plug Power (W) Luminaire Output  Beam Angle  Fitting Colour
WW (3000K) NW (4000K)
74 Non Dim  10.8  583 635 70 Wt, Al
Dim/DALI  11.5
Available colours: NW WW
CRI: Min 80

The CL5H-Diff-R is a diffused recessed LED ceiling luminaire containing 5 x 2.4W Osram LEDs.

It can be used as a replacement for the 35W or 50W halogen down lighter and is ideal for new or retrofit applications where a wide angle and a diffused look is required.

Ceiling Light CL5H-Diff-R
Cut Out Size (mm) Dim/Non Dim Plug Power (W) Luminaire Output  Beam Angle  Fitting Colour
WW (3000K) NW (4000K)
74 Non Dim  13.2 727 790  70 Wt, Al
Dim/DALI  13.7
Available colours: NW WW
CRI: Min 80

The CL4H-Diff-R-Curve is a diffused recessed LED ceiling luminaire containing 4 x 2.4W Osram LEDs.

It can be used as a replacement for the 35W or 50W halogen down lighter and is ideal for new or retrofit applications where a wide angle and a diffused look is required.

Ceiling Light CL4H-Diff-R-Curve
Cut Out Size (mm) Dim/Non Dim Plug Power (W) Luminaire Output  Beam Angle  Fitting Colour
WW (3000K) NW (4000K)
90 Non Dim  10.8 583 635 70 Wt
Dim/DALI  11.5
Available colours: NW WW
CRI: Min 80

The CL5H-Diff-R-Curve is a diffused recessed LED ceiling luminaire containing 5 x 2.4W Osram LEDs.

It can be used as a replacement for the 35W or 50W halogen down lighter and is ideal for new or retrofit applications where a wide angle and a diffused look is required.

Ceiling Light CL5H-Diff-R-Curve
Cut Out Size (mm) Dim/Non Dim Plug Power (W) Luminaire Output  Beam Angle  Fitting Colour
WW (3000K) NW (4000K)
90 Non Dim  13.2 727 790  70 Wt
Dim/DALI  13.7
Available colours: NW WW
CRI: Min 80

The COB5 is a recessed LED ceiling luminaire containing 1 x 5W Bridgelux COB (Chip on Board) LED. High CRI available.

It can be used as a replacement for a halogen down lighter and is ideal for new or retrofit applications.

Ceiling Light COB5
Cut Out Size (mm) Dim/Non Dim Plug Power (W) Luminaire Output  Beam Angle  Fitting Colour
WW (3000K) NW (4000K)
74 Non Dim 4.7 449 462 36 Al, Wt
Available colours: NW WW
CRI: Min 80

The COB8 is a recessed LED ceiling luminaire containing 1 x 6W Bridgelux COB (Chip on Board) LED. High CRI available.

It can be used as a replacement for a halogen down lighter and is ideal for new or retrofit applications.

Ceiling Light COB8
Cut Out Size (mm) Dim/Non Dim Plug Power (W) Luminaire Output  Beam Angle  Fitting Colour
WW (3000K) NW (4000K)
74 Non Dim 6.4 569 598 36 Al, Wt
Available colours: NW WW
CRI: Min 80

The COB10 is a recessed LED ceiling luminaire containing 1 x 10W Bridgelux COB (Chip on Board) LED. High CRI and speciality CCTs available.

It can be used as a replacement for the 35W or 50W halogen down lighter and is ideal for new or retrofit applications.

Ceiling Light COB10
Cut Out Size (mm) Dim/Non Dim Plug Power (W) Luminaire Output  Beam Angle  Fitting Colour
WW (3000K) NW (4000K)
74 Non Dim  10.9 1149 1218 36 Al, Wt
Dim/DALI 12.8
Available colours: NW WW
CRI: Min 80

The COB10-L is a recessed, lensed LED ceiling luminaire containing 1 x 10W Bridgelux COB (Chip on Board) LED. High CRI and speciality CCTs available.

It can be used as a replacement for the 35W or 50W halogen down lighter and is ideal for new or retrofit applications.

Ceiling Light COB10-L
Cut Out Size (mm) Dim/Non Dim Plug Power (W) Luminaire Output  Beam Angle  Fitting Colour
WW (3000K) NW (4000K)
50 Non Dim  10.3 885 945 35, 44, 56 Al, Wt
Dim/DALI 10.3
Available colours: NW WW
CRI: Min 80

The COB10-Curve is a recessed LED ceiling luminaire containing 1 x 10W Bridgelux COB (Chip on Board) LED. High CRI and speciality CCTs available.

It can be used as a replacement for the 35W or 50W halogen down lighter and is ideal for new or retrofit applications.

Ceiling Light COB10-Curve
Cut Out Size (mm) Dim/Non Dim Plug Power (W) Luminaire Output  Beam Angle  Fitting Colour
WW (3000K) NW (4000K)
90 Non Dim  10.9 1149 1218 36 Wt
Dim/DALI 12.8
Available colours: NW WW
CRI: Min 80

The COB15 is a recessed LED ceiling luminaire containing 1 x 15W Bridgelux COB (Chip on Board) LED. High CRI and speciality CCTs available.

Ceiling Light COB15
Cut Out Size (mm) Dim/Non Dim Plug Power (W) Luminaire Output  Beam Angle  Fitting Colour
WW (3000K) NW (4000K)
90 Non Dim 14.7 1539 1631  17, 36, 60, 75 Wt, Al
Dim/DALI  14.2
Available colours: NW WW
CRI: Min 80

The CL12 is a recessed lensed LED ceiling luminaire containing 12 x 1.2W Osram LEDs.

Ceiling Light CL12
Cut Out Size (mm) Dim/Non Dim Plug Power (W) Luminaire Output  Beam Angle  Fitting Colour
WW (3000K) NW (4000K)
90 Non Dim 14.3 1085 1169  25, 35 Wt, Al
Dim/DALI  14
Available colours: NW WW
CRI: Min 80

The CL6H-Diff-F is a diffused flat LED ceiling luminaire containing 6 x 2.4W Osram LEDs.

Ceiling Light CL6H-Diff-F
Cut Out Size (mm) Dim/Non Dim Plug Power (W) Luminaire Output  Beam Angle  Fitting Colour
WW (3000K) NW (4000K)
90 Non Dim  14.5 1026 1118 80 Wt, Al
Dim/DALI  15.4

 

The CL6H-Diff-F is a diffused flat LED ceiling luminaire containing 6 x 2.4W Osram LEDs.

Available colours: NW WW
CRI: Min 80

The CL7H-Diff-F is a diffused flat LED ceiling luminaire containing 7 x 2.4W Osram LEDs.

Ceiling Light CL7H-Diff-F
Cut Out Size (mm) Dim/Non Dim Plug Power (W) Luminaire Output  Beam Angle  Fitting Colour
WW (3000K) NW (4000K)
90 Non Dim  16.9 1208 1312 80 Wt, Al
Dim/DALI  18.4
Available colours: NW WW
CRI: Min 80

The CL6H-Diff-R is a diffused recessed LED ceiling luminaire containing 6 x 2.4W Osram LEDs.

Ceiling Light CL6H-Diff-R
Cut Out Size (mm) Dim/Non Dim Plug Power (W) Luminaire Output  Beam Angle  Fitting Colour
WW (3000K) NW (4000K)
90 Non Dim 14.5 962 1043 80 Wt, Al
Dim/DALI  15.4
Available colours: NW WW
CRI: Min 80

The CL7H-Diff-R is a diffused recessed LED ceiling luminaire containing 7 x 2.4W Osram LEDs.

Ceiling Light CL7H-Diff-R
Cut Out Size (mm) Dim/Non Dim Plug Power (W) Luminaire Output  Beam Angle  Fitting Colour
WW (3000K) NW (4000K)
90 Non Dim  16.9  1208 1312 80 Wt, Al
Dim/DALI  18.4
Available colours: NW WW
CRI: Min 80

The CL12-Diff-R is a diffused recessed LED ceiling luminaire containing 36 x 0.3W Osram LEDs.

Ceiling Light CL12-Diff-R
Cut Out Size (mm) Dim/Non Dim Plug Power (W) Luminaire Output  Beam Angle  Fitting Colour
WW (3000K) NW (4000K)
140 Non Dim 14.7 1635 1635  95 Wt, Al
Dim/DALI  14.5
Available colours: NW WW
CRI: Min 80

The CL19 is a recessed lensed LED ceiling luminaire containing 19 x 1.2W Osram LEDs.

It can be used for spot light applications (15 degree beam angle) or for high volume ceiling areas (50 or 65 degree beam angle) where high light levels are required.

Ceiling Light CL19
Cut Out Size (mm) Dim/Non Dim Plug Power (W) Luminaire Output  Beam Angle  Fitting Colour
WW (3000K) NW (4000K)
140 Non Dim  22.3  1740 1874  15, 50, 67, O Wt, Al
Dim/DALI  22.3
Available colours: NW WW
CRI: Min 80

The CL19-Diff-R is a diffused recessed LED ceiling luminaire containing 54 x 0.3W Osram LEDs.

It can be used as a replacement for 2 x 18W CFL down light.

Ceiling Light CL19-Diff-R
Cut Out Size (mm) Dim/Non Dim Plug Power (W) Luminaire Output  Beam Angle  Fitting Colour
WW (3000K) NW (4000K)
140 Non Dim  21.9 2655 2655  95 Wt, Al
Dim/DALI  21.9
Available colours: NW WW
CRI: Min 80

The CL24-Diff-R is a diffused recessed LED ceiling luminaire containing 72 x 0.3W Osram LEDs.

It can be used as a replacement for 2 x 26W CFL down light.

Ceiling Light CL24-Diff-R
Cut Out Size (mm) Dim/Non Dim Plug Power (W) Luminaire Output  Beam Angle  Fitting Colour
WW (3000K) NW (4000K)
140 Non Dim  28 3450 3450 95 Wt, Al
Dim/DALI 28
Available colours: NW WW
CRI: Min 80

The COB25-R is a recessed LED ceiling luminaire containing 1 x 25W Osram COB (Chip on Board) LED. High CRI and speciality CCTs available.

Ceiling Light COB25-R
Cut Out Size (mm) Dim/Non Dim Plug Power (W) Luminaire Output Beam Angle Fitting Colour
WW (3000K) NW (4000K)
144 Non Dim 25 2705 2803 15, 30, 40, 60 Wt
Dim/DALI 25
Available colours: NW WW
CRI: Min 80

The COB35-R is a recessed LED ceiling luminaire containing 1 x 35W Osram COB (Chip on Board) LED. High CRI and speciality CCTs available.

Ceiling Light COB35-R
Cut Out Size (mm) Dim/Non Dim Plug Power (W) Luminaire Output  Beam Angle  Fitting Colour
WW (3000K) NW (4000K)
144 Non Dim 35 3835 3974 15, 30, 40, 60 Wt
Dim/DALI 35
Available colours: NW WW
CRI: Min 80

The COB45-R is a recessed LED ceiling luminaire containing 1 x 45W Osram COB (Chip on Board) LED. High CRI and speciality CCTs available.

Ceiling Light COB45-R
Cut Out Size (mm) Dim/Non Dim Plug Power (W) Luminaire Output  Beam Angle  Fitting Colour
WW (3000K) NW (4000K)
144 Non Dim 45 4681 4851 15, 30, 40, 60 Wt
Dim/DALI 45
Available colours: NW WW
CRI: Min 80

The COB25-RT is a retractable and rotatable LED ceiling luminaire containing 1 x 25W Osram COB (Chip on Board) LED. High CRI and speciality CCTs available.

Ceiling Light COB25-RT
Cut Out Size (mm) Dim/Non Dim Plug Power (W) Luminaire Output  Beam Angle  Fitting Colour
WW (3000K) NW (4000K)
155 Non Dim 23.3 2457 2546 15, 30, 40, 60 Wt
Dim/DALI 23.3
Available colours: NW WW
CRI: Min 80

The COB35-RT is a retractable and rotatable LED ceiling luminaire containing 1 x 35W Osram COB (Chip on Board) LED. High CRI and speciality CCTs available.

Ceiling Light COB35-RT
Cut Out Size (mm) Dim/Non Dim Plug Power (W) Luminaire Output  Beam Angle  Fitting Colour
WW (3000K) NW (4000K)
155 Non Dim 34.8 3445 3570 15, 30, 40, 60 Wt
Dim/DALI 34.8
Available colours: NW WW
CRI: Min 80

The CL7-Dish95 is a diffused recessed LED ceiling luminaire containing 24 x 0.3W Osram LEDs.

It can be used as a replacement for the 35W or 50W halogen down lighter and is ideal for new or retrofit applications where a wide angle and a diffused look is required.

Ceiling Light CL7-Dish95
Cut Out Size (mm) Dim/Non Dim Plug Power (W) Luminaire Output  Beam Angle  Fitting Colour
WW (3000K) NW (4000K)
95 Non Dim 7.9 654 654 100 Wt
Dim/DALI  8
Available colours: NW WW
CRI: Min 80

The CL10-Dish95 is a diffused recessed LED ceiling luminaire containing 24 x 0.3W Osram LEDs.

It can be used as a replacement for the 35W or 50W halogen down lighter and is ideal for new or retrofit applications where a wide angle and a diffused look is required.

Ceiling Light CL10-Dish95
Cut Out Size (mm) Dim/Non Dim Plug Power (W) Luminaire Output  Beam Angle  Fitting Colour
WW (3000K) NW (4000K)
95 Non Dim 10.7 893 893 100 Wt
Dim/DALI 11.1
Available colours: NW WW
CRI: Min 80

The CL10-Dish135 is a diffused recessed LED ceiling luminaire containing 36 x 0.3W Osram LEDs.

It can be used as a replacement for the 35W or 50W halogen down lighter and is ideal for new or retrofit applications where a wide angle and a diffused look is required.

Ceiling Light CL10-Dish135
Cut Out Size (mm) Dim/Non Dim Plug Power (W) Luminaire Output  Beam Angle  Fitting Colour
WW (3000K) NW (4000K)
135 Non Dim 10.7 1255 1255 100 Wt
Dim/DALI 11.1
Available colours: NW WW
CRI: Min 80

The CL15-Dish135 is a diffused recessed LED ceiling luminaire containing 36 x 0.3W Osram LEDs.

It can be used as a replacement for 1 x 18W CFL down light and is ideal for new or retrofit applications where a wide angle and a diffused look is required.

Ceiling Light CL15-Dish135
Cut Out Size (mm) Dim/Non Dim Plug Power (W) Luminaire Output  Beam Angle  Fitting Colour
WW (3000K) NW (4000K)
135 Non Dim 14.7 1725 1725 100 Wt
Dim/DALI 14.5
Available colours: NW WW
CRI: Min 80

The CL10-Dish170 is a diffused recessed LED ceiling luminaire containing 36 x 0.3W Osram LEDs.

It can be used as a replacement for the 35W or 50W halogen down lighter and is ideal for new or retrofit applications where a wide angle and a diffused look is required.

Ceiling Light CL10-Dish170
Cut Out Size (mm) Dim/Non Dim Plug Power (W) Luminaire Output  Beam Angle  Fitting Colour
WW (3000K) NW (4000K)
170 Non Dim 10.7 1245 1245 100 Wt
Dim/DALI 11.1
Available colours: NW WW
CRI: Min 80

The CL15-Dish170 is a diffused recessed LED ceiling luminaire containing 36 x 0.3W Osram LEDs.

It can be used as a replacement for 1 x 18W CFL down light and is ideal for new or retrofit applications where a wide angle and a diffused look is required.

Ceiling Light CL15-Dish170
Cut Out Size (mm) Dim/Non Dim Plug Power (W) Luminaire Output  Beam Angle  Fitting Colour
WW (3000K) NW (4000K)
170 Non Dim 14.7 1705 1705 100 Wt
Dim/DALI 14.5
Available colours: NW WW
CRI: Min 80

The CL22-Dish170 is a diffused recessed LED ceiling luminaire containing 54 x 0.3W Osram LEDs.

It can be used as a replacement for 2 x 18W CFL down light and is ideal for new or retrofit applications where a wide angle and a diffused look is required.

Ceiling Light CL22-Dish170
Cut Out Size (mm) Dim/Non Dim Plug Power (W) Luminaire Output  Beam Angle  Fitting Colour
WW (3000K) NW (4000K)
170 Non Dim 21.9 2560 2560 100 Wt
Dim/DALI 21.9
Available colours: NW WW
CRI: Min 80

The CL22-Dish205 is a diffused recessed LED ceiling luminaire containing 54 x 0.3W Osram LEDs.

It can be used as a replacement for 2 x 18W CFL down light and is ideal for new or retrofit applications where a wide angle and a diffused look is required.

Ceiling Light CL22-Dish205
Cut Out Size (mm) Dim/Non Dim Plug Power (W) Luminaire Output  Beam Angle  Fitting Colour
WW (3000K) NW (4000K)
205 Non Dim 21.9 2754 2754 100 Wt
Dim/DALI 21.9
Available colours: NW WW
CRI: Min 80

The CL28-Dish205 is a diffused recessed LED ceiling luminaire containing 72 x 0.3W Osram LEDs.

It can be used as a replacement for 2 x 26W CFL down light and is ideal for new or retrofit applications where a wide angle and a diffused look is required.

Ceiling Light CL28-Dish205
Cut Out Size (mm) Dim/Non Dim Plug Power (W) Luminaire Output  Beam Angle  Fitting Colour
WW (3000K) NW (4000K)
205 Non Dim 28 3672 3672 100 Wt
Dim/DALI 28
Available colours: NW WW
CRI: Min 80

The CL12-Dish160 is a diffused recessed LED ceiling luminaire containing 36 x 0.3W Osram LEDs.

It can be used as a replacement for 1 x 18W CFL down light.

Ceiling Light CL12-Dish 160
Cut Out Size (mm) Dim/Non Dim Plug Power (W) Luminaire Output  Beam Angle  Fitting Colour
WW (3000K) NW (4000K)
160 Non Dim 14.7 1607 1607 80 Wt
Dim/DALI  14.5
Available colours: NW WW
CRI: Min 80

The CL19-Dish200 is a diffused recessed LED ceiling luminaire containing 54 x 0.3W Osram LEDs.

It can be used as a replacement for 2 x 18W CFL down light.

Ceiling Light CL19-Dish200
Cut Out Size (mm) Dim/Non Dim Plug Power (W) Luminaire Output  Beam Angle  Fitting Colour
WW (3000K) NW (4000K)
200 Non Dim 21.9 2539 2539 87 Wt
Dim/DALI 21.9
Available colours: NW WW
CRI: Min 80

The CL24-Dish200 is a diffused recessed LED ceiling luminaire containing 72 x 0.3W Osram LEDs.

It can be used as a replacement for 2 x 26W CFL down light.

DALI, DSI and SwitchDIM available.

Ceiling Light CL24-Dish200
Cut Out Size (mm) Dim/Non Dim Plug Power (W) Luminaire Output  Beam Angle  Fitting Colour
WW (3000K) NW (4000K)
200 Non Dim 28 3357 3357 90 Wt
Dim/DALI 28
Available colours: NW WW
CRI: Min 80

The Channel Light CH-1200 surface mount luminaire is a surface channel light containing 132 x Osram LEDs. It is available in 60, 90 degree or aisle distributions. It is supplied standard with either two 20mm nylon mounting adaptors or 6mm spring nuts for P2000 trunking.

Channel Light CH-1200
  Channel Light   Dim/Non Dim Plug Power (W)     Luminaire Output  Beam Angle    Fitting Colour
WW (3000K) NW (4000K)
Aisle Non Dim 50.6 6495 6495 Aisle Wt,Gr,Bk
60 & 90 Non Dim 50.6 6560 6560 60,90 Wt,Gr,Bk
Available colours: NW WW
CRI: Min 80

The ACE-L luminaire is high efficiency continuous linear light with Osram LEDs and advanced lens technology. Specifically designed for retail aisle lighting, it clips onto P2000 Trunking for easy installation and only requires one AC power feed for 50m of continuous illumination. It is available in symmetric and asymmetric aisle lens distributions as well as oval, 60° and 90°.

Continuous Linear Light ACE-L
Product Code
  Dim/Non Dim Plug Power (W)     Luminaire Output  Beam Angle    Fitting Colour
WW (3000K) NW (4000K)
ACE-L-1700-76W Non Dim 76 8426 8426 AS, AA, O, 60°, 90° Wt,Al,Bk
Available colours: NW WW
CRI: Min 80

The Glide-900 surface mount luminaire is a channel light containing Osram LEDs. Dimmable, DALI and built-in emergency gear available on request. Custom colours available. The Glide-900-29W can be used as a replacement for a single 36W fluorescent open channel, the Glide-900-40W can be used as a replacement for a single 58W fluorescent open channel and the Glide-900-57W can be used as a replacement for a double 36W fluorescent open channel

Glide-900
Product Code Plug Power (W) Luminaire Output Beam Angle Fitting Colour
WW (3000K) NW (4000K)
Glide-900-29W 29 2988 2988 120 x 95 Wt, Custom
Glide-900-34W 34 3555 3555 120 x 95 Wt, Custom
Glide-900-40W 40 4087 4087 120 x 95 Wt, Custom
Glide-900-48W 48 5019 5019 120 x 95 Wt, Custom
Glide-900-57W 57 5751 5751 120 x 95 Wt, Custom
Glide-900-63W 63 6481 6481 120 x 95 Wt, Custom
Available colours: NW WW
CRI: Min 80

The Glide-1200 surface mount luminaire is a channel light containing Osram LEDs. Dimmable, DALI and built-in emergency gear available on request. Custom colours available. The Glide-1200-29W can be used as a replacement for a single 36W fluorescent open channel, the Glide-1200-40W can be used as a replacement for a single 58W fluorescent open channel and the Glide-1200-54W can be used as a replacement for a double 36W fluorescent open channel

Glide-1200
Product Code Plug Power (W) Luminaire Output Beam Angle Fitting Colour
WW (3000K) NW (4000K)
Glide-1200-29W 29 3014 3014 120 x 95 Wt, Custom
Glide-1200-34W 34 3592 3592 120 x 95 Wt, Custom
Glide-1200-40W 40 4171 4171 120 x 95 Wt, Custom
Glide-1200-46W 46 4740 4740 120 x 95 Wt, Custom
Glide-1200-54W 54 5430 5430 120 x 95 Wt, Custom
Glide-1200-61W 61 6121 6121 120 x 95 Wt, Custom
Available colours: NW WW
CRI: Min 80

The Glide-1300 surface mount luminaire is a channel light containing Osram LEDs. Dimmable, DALI and built-in emergency gear available on request. Custom colours available. The Glide-1300-86W can be used as a replacement for a double 58W fluorescent open channel

Glide-1300
Product Code Plug Power (W) Luminaire Output Beam Angle Fitting Colour
WW (3000K) NW (4000K)
Glide-1300-73W 73 7528 7528 120 x 95 Wt, Custom
Glide-1300-86W 86 8655 8655 120 x 95 Wt, Custom
Glide-1300-95W 95 9573 9573 120 x 95 Wt, Custom
Available colours: NW WW
CRI: Min 80

The Parking Garage Light PL-900-BV surface mount luminaire is a channel light containing Osram LEDs with Brightview diffusers. Various dimming options are available, as well as PIR sensor switching or built-in emergency gear.

Parking Garage Light PL-900-BV
Product Code Dimming Plug Power (W) Luminaire Output Beam Angle Fitting Colour
WW (3000K) NW (4000K)
PL-900-29W-BV Non Dim/ DALI/ Emergency Gear/ PIR/ PIR Dimming 29 2963 2963 130x90 Wt,Gr,Bk
PL-900-34W-BV 34 3525 3525 130x90 Wt,Gr,Bk
PL-900-40W-BV 40 4052 4052 130x90 Wt,Gr,Bk
PL-900-48W-BV 48 4977 4977 130x90 Wt,Gr,Bk
PL-900-57W-BV 57 5702 5702 130x90 Wt,Gr,Bk
PL-900-63W-BV 63 6427 6427 130x90 Wt,Gr,Bk
Available colours: NW WW
CRI: Min 80

The Parking Garage Light PL-900-ML surface mount luminaire is a channel light containing Osram LEDs with Microlinear diffusers. Various dimming options are available, as well as PIR sensor switching or built-in emergency gear.

Parking Garage Light PL-900-ML
Product Code Dimming Plug Power (W) Luminaire Output Beam Angle Fitting Colour
WW (3000K) NW (4000K)
PL-900-29W-ML Non Dim/ DALI/ Emergency Gear/ PIR/ PIR Dimming 29 3181 3181 130x90 Wt,Gr,Bk
PL-900-34W-ML 34 3784 3784 130x90 Wt,Gr,Bk
PL-900-40W-ML 40 4350 4350 130x90 Wt,Gr,Bk
PL-900-48W-ML 48 5343 5343 130x90 Wt,Gr,Bk
PL-900-57W-ML 57 6121 6121 130x90 Wt,Gr,Bk
PL-900-63W-ML 63 6899 6899 130x90 Wt,Gr,Bk
Available colours: NW WW
CRI: Min 80

The Parking Garage Light PL-1200-BV surface mount luminaire is a channel light containing Osram LEDs with Brightview diffusers. Various dimming options are available, as well as PIR sensor switching or built-in emergency gear.

Parking Garage Light PL-1200-BV
Product Code Dimming Plug Power (W) Luminaire Output Beam Angle Fitting Colour
WW (3000K) NW (4000K)
PL-1200-29W-BV Non Dim/ DALI/ Emergency Gear/ PIR/ PIR Dimming 29 2988 2988 130x90 Wt,Gr,Bk
PL-1200-34W-BV 34 3562 3562 130x90 Wt,Gr,Bk
PL-1200-40W-BV 40 4136 4136 130x90 Wt,Gr,Bk
PL-1200-46W-BV 46 4700 4700 130x90 Wt,Gr,Bk
PL-1200-54W-BV 54 5385 5385 130x90 Wt,Gr,Bk
PL-1200-61W-BV 61 6070 6070 130x90 Wt,Gr,Bk
Available colours: NW WW
CRI: Min 80

The Parking Garage Light PL-1200-ML surface mount luminaire is a channel light containing Osram LEDs with Microlinear diffusers. Various dimming options are available, as well as PIR sensor switching or built-in emergency gear.

Parking Garage Light PL-1200-ML
Product Code Dimming Plug Power (W) Luminaire Output Beam Angle Fitting Colour
WW (3000K) NW (4000K)
PL-1200-29W-ML Non Dim/ DALI/ Emergency Gear/ PIR/ PIR Dimming 29 3208 3208 130x90 Wt,Gr,Bk
PL-1200-34W-ML 34 3824 3824 130x90 Wt,Gr,Bk
PL-1200-40W-ML 40 4440 4440 130x90 Wt,Gr,Bk
PL-1200-46W-ML 46 5046 5046 130x90 Wt,Gr,Bk
PL-1200-54W-ML 54 5781 5781 130x90 Wt,Gr,Bk
PL-1200-61W-ML 61 6516 6516 130x90 Wt,Gr,Bk
Available colours: NW WW
CRI: Min 80

The Parking Garage Light PL-1500-BV surface mount luminaire is a channel light containing Osram LEDs with Brightview diffusers. Various dimming options are available, as well as PIR sensor switching or built-in emergency gear.

Parking Garage Light PL-1500-BV
Product Code Dimming Plug Power (W) Luminaire Output Beam Angle Fitting Colour
WW (3000K) NW (4000K)
PL-1500-29W-BV Non Dim/ DALI/ Emergency Gear/ PIR/ PIR Dimming 29 3007 3007 130x90 Wt,Gr,Bk
PL-1500-34W-BV 34 3597 3597 130x90 Wt,Gr,Bk
PL-1500-40W-BV 40 4175 4175 130x90 Wt,Gr,Bk
PL-1500-46W-BV 46 4742 4742 130x90 Wt,Gr,Bk
PL-1500-54W-BV 54 5447 5447 130x90 Wt,Gr,Bk
PL-1500-61W-BV 61 6153 6153 130x90 Wt,Gr,Bk
PL-1500-69W-BV 69 6974 6974 130x90 Wt,Gr,Bk
PL-1500-81W-BV 81 8050 8050 130x90 Wt,Gr,Bk
PL-1500-90W-BV 90 8848 8848 130x90 Wt,Gr,Bk
Available colours: NW WW
CRI: Min 80

The Parking Garage Light PL-1500-ML surface mount luminaire is a channel light containing Osram LEDs with Microlinear diffusers. Various dimming options are available, as well as PIR sensor switching or built-in emergency gear.

Parking Garage Light PL-1500-ML
Product Code Dimming Plug Power (W) Luminaire Output Beam Angle Fitting Colour
WW (3000K) NW (4000K)
PL-1500-29W-ML Non Dim/ DALI/ Emergency Gear/ PIR/ PIR Dimming 29 3228 3228 130x90 Wt,Gr,Bk
PL-1500-34W-ML 34 3861 3861 130x90 Wt,Gr,Bk
PL-1500-40W-ML 40 4482 4482 130x90 Wt,Gr,Bk
PL-1500-46W-ML 46 5091 5091 130x90 Wt,Gr,Bk
PL-1500-54W-ML 54 5848 5848 130x90 Wt,Gr,Bk
PL-1500-61W-ML 61 6605 6605 130x90 Wt,Gr,Bk
PL-1500-69W-ML 69 7487 7487 130x90 Wt,Gr,Bk
PL-1500-81W-ML 81 8642 8642 130x90 Wt,Gr,Bk
PL-1500-90W-ML 90 9499 9499 130x90 Wt,Gr,Bk
Available colours: NW WW
CRI: Min 80

The Baton-900 surface mount luminaire is a channel light containing Osram LEDs. Dimmable, DALI and built-in emergency gear available on request. Custom colours available. The Baton-900-20W can be used as a replacement for a single 36W fluorescent open channel and the Baton-900-37W can be used as a replacement for a single 58W fluorescent open channel.

Baton-900
Product Code Plug Power (W) Luminaire Output Beam Angle Fitting Colour
WW (3000K) NW (4000K)
Baton-900-20W 20 2395 2395 108 Wt, Custom
Baton-900-31W 31 3630 3630 108 Wt, Custom
Baton-900-37W 37 4296 4296 108 Wt, Custom
Available colours: NW WW
CRI: Min 80

The Baton-1200 surface mount luminaire is a channel light containing Osram LEDs. Dimmable, DALI and built-in emergency gear available on request. Custom colours available. The Baton-1200-20W can be used as a replacement for a single 36W fluorescent open channel and the Baton-1200-35W can be used as a replacement for a single 58W fluorescent open channel.

Baton-1200
Product Code Plug Power (W) Luminaire Output Beam Angle Fitting Colour
WW (3000K) NW (4000K)
Baton-1200-20W 20 2444 2444 108 Wt, Custom
Baton-1200-30W 30 3428 3428 108 Wt, Custom
Baton-1200-35W 35 4057 4057 108 Wt, Custom
Available colours: NW WW
CRI: Min 80

The Baton-1300 surface mount luminaire is a channel light containing Osram LEDs. Dimmable, DALI and built-in emergency gear available on request. Custom colours available. The Baton-1300-31W can be used as a replacement for a single 36W fluorescent open channel, the Baton-1300-47W can be used as a replacement for a double 36W fluorescent open channel and the Baton-1300-57W can be used as a replacement for a double 58W open channel or a single 80W open channel.

Baton-1300
Product Code Plug Power (W) Luminaire Output Beam Angle Fitting Colour
WW (3000K) NW (4000K)
Baton-1300-31W 31 3708 3708 108 Wt, Custom
Baton-1300-37W 37 4412 4412 108 Wt, Custom
Baton-1300-47W 47 5784 5784 108 Wt, Custom
Baton-1300-57W 57 6609 6609 108 Wt, Custom
Available colours: NW WW
CRI: Min 80

The HBL range of high bay lights is available in power options of 70W, 105W, 140W, 175W and 200W. Many standard distributions available with the possibility for custom designs. Osram LEDs. Anodised aluminium heatsink for good thermal management. Mounts to P2000 trunking or can be suspended. Occupancy / daylight dimming available on request. An IP65 rated version is also available.

High Bay HBL Range
 Product Code   Mounting   Dim/Non Dim Plug Power  (W)       Luminaire   Output  Beam  Angle    Fitting  Colour
CW (5700K)
HBL-70 P2000 / Suspended on request 67 8313 30°, 55°, 90°, Oval, Flood etc. Al
HBL-105 P2000 / Suspended on request 101 12 470 30°, 55°, 90°, Oval, Flood etc. Al
HBL-140 P2000 / Suspended on request 134 16 627 30°, 55°, 90°, Oval, Flood etc. Al
HBL-175 P2000 / Suspended on request 168 20 783 30°, 55°, 90°, Oval, Flood etc. Al
HBL-200 P2000 / Suspended on request 201 24 940 30°, 55°, 90°, Oval, Flood etc. Al
Available colours: NW W
CRI: Min 70

The TL15 luminaire is a track light containing 1 x 15W Bridgelux COB (Chip on Board) LED. It is supplied standard with a 3 way track adaptor compatible with the EU track.

Track Light TL15
  Cut Out Size (mm)   Dim/Non Dim Plug Power (W)     Luminaire Output  Beam Angle    Fitting Colour
WW (3000K) NW (4000K)
 n/a Non Dim 13.7 1519 1610 15, 24 Wt, Bk
Dim 13.7
Available colours: NW WW
CRI: Min 80

The TL25 luminaire is a track light containing 1 x 25W Bridgelux COB (Chip on Board) LED. It is supplied standard with a 3 way track adaptor compatible with the EU track.

It can be used as a replacement for the 35W or 70W metal halide track fittings.

Track Light TL25
  Cut Out Size (mm)   Dim/Non Dim Plug Power (W)     Luminaire Output  Beam Angle    Fitting Colour
WW (3000K) NW (4000K)
 n/a Non Dim 22.8 2904 3078 15, 30 or 45 Wt, Bk
Available colours: NW WW
CRI: Min 80

The TL35 luminaire is a track light containing 1 x 35W Bridgelux COB (Chip on Board) LED. It is supplied standard with a 3 way track adaptor compatible with the EU track.

It can be used as a replacement for the 35W or 70W metal halide track fittings.

Track Light TL35
  Cut Out Size (mm)   Dim/Non Dim Plug Power (W)     Luminaire Output  Beam Angle    Fitting Colour
WW (3000K) NW (4000K)
 n/a Non Dim 34.8 4139 4387 15, 30 or 45 Wt, Bk
Available colours: NW WW
CRI: Min 80

The TL45 luminaire is a track light containing 1 x 45W Bridgelux COB (Chip on Board) LED. It is supplied standard with a 3 way track adaptor compatible with the EU track.

It can be used as a replacement for the 35W or 70W metal halide track fittings.

Track Light TL45
  Cut Out Size (mm)   Dim/Non Dim Plug Power (W)     Luminaire Output  Beam Angle    Fitting Colour
WW (3000K) NW (4000K)
 n/a Non Dim 45.7 5388 5711 15, 30 or 45 Wt, Bk
Available colours: NW WW
CRI: Min 80

The TL60 luminaire is a track light containing 1 x 60W Bridgelux COB (Chip on Board) LED. It is supplied standard with a 3 way track adaptor compatible with the EU track.

It can be used as a replacement for the 35W or 70W metal halide track fittings.

Track light TL60
  Cut Out Size (mm)   Dim/Non Dim Plug Power (W)     Luminaire Output  Beam Angle    Fitting Colour
WW (3000K) NW (4000K)
 n/a Non Dim 59.1 6489 6878 15, 30 or 45 Wt, Bk
Available colours: NW WW
CRI: Min 80

The SM15 luminaire is a surface mount light containing 1 x 15W Bridgelux COB (Chip on Board) LED.

Surface Mount Light SM15
  Cut Out Size (mm)   Dim/Non Dim Plug Power (W)     Luminaire Output  Beam Angle    Fitting Colour
WW (3000K) NW (4000K)
 n/a Non Dim 13.7 1519 1610 15, 24 Wt, Bk
Dim 13.7
Available colours: NW WW
CRI: Min 80

The SM25 luminaire is a surface mount light containing 1 x 25W Bridgelux COB (Chip on Board) LED.

It can be used as a replacement for the 35W or 70W metal halide fittings.

Surface Mount Light SM25
  Cut Out Size (mm)   Dim/Non Dim Plug Power (W)     Luminaire Output  Beam Angle    Fitting Colour
WW (3000K) NW (4000K)
 n/a Non Dim 22.8 2904 3078 15, 30 or 45 Wt, Bk
Available colours: NW WW
CRI: Min 80

The SM35 luminaire is a surface mount light containing 1 x 35W Bridgelux COB (Chip on Board) LED.

It can be used as a replacement for the 35W or 70W metal halide fittings.

Surface Mount Light SM35
  Cut Out Size (mm)   Dim/Non Dim Plug Power (W)     Luminaire Output  Beam Angle    Fitting Colour
WW (3000K) NW (4000K)
 n/a Non Dim 34.8 4139 4387 15, 30 or 45 Wt, Bk
Available colours: NW WW
CRI: Min 80

The SM45 luminaire is a surface mount light containing 1 x 45W Bridgelux COB (Chip on Board) LED.

It can be used as a replacement for the 35W or 70W metal halide track fittings.

Surface Mount Light SM45
  Cut Out Size (mm)   Dim/Non Dim Plug Power (W)     Luminaire Output  Beam Angle    Fitting Colour
WW (3000K) NW (4000K)
 n/a Non Dim 45.7 5388 5711 15, 30 or 45 Wt, Bk
Available colours: NW WW
CRI: Min 80

The SM60 luminaire is a surface mount light containing 1 x 60W Bridgelux COB (Chip on Board) LED. I

It can be used as a replacement for the 35W or 70W metal halide fittings.

Surface Mount Light SM60
  Cut Out Size (mm)   Dim/Non Dim Plug Power (W)     Luminaire Output  Beam Angle    Fitting Colour
WW (3000K) NW (4000K)
 n/a Non Dim 59.1 6489 6878 15, 30 or 45 Wt, Bk
Available colours: NW WW
CRI: Min 80

It can be used for signage, shopfitting and architectural applications including shelf lighting, cove lighting, display case illumination and bulkhead illumination.

For signage it is ideal for halo illumination where the distance from the LEDs to the reflecting surface is greater than 30mm. It is also ideal for backlighting of light-boxes where the depth of the box is less than 120mm. Recommended row spacing is 15mm less than the light-box depth.

It can also be used for exposed light line applications. If the the viewing distance is greater than 10m then the lightline will look continuous.

Light Line LL-A-24-25
Available colours: W NW WW
CRI: Min 80

The 24V medium powered light line, LL-A-24-33 consumes 12.2W/m, has LEDs spaced 33mm apart and produces1200 lum/m in cool white. 

It is ideally suited for indoor and outdoor architectural illumination especially cove lighting, bulkhead lighting, signage and facade illumination.

For signage, it is very well suited for backlightling of large format light boxes where the depth of the box is 150mm or greater.

Light Line LL-A-24-33
Available colours: W NW WW
CRI: Min 80

The 24V medium powered light line, LL-A-24-14 consumes 25W/m, has LEDs spaced 14mm apart and produces 2800 lum/m in cool white. 

It is ideally suited for indoor and outdoor architectural illumination especially cove lighting, bulkhead lighting, and facade illumination where high light output is required.

Light Line LL-A-24-14
Available colours: W NW WW
CRI: Min 80

The 24V medium powered shelf light, SL-A-24-07 consumes 12.2W/m, has completely diffused LEDs and produces 842 lm/m in natural white.

It is ideally suited for retail shelf illumination. Available in Natural White CRI90 and specialty Meat CCT as standard.

Shelf Light SL-A-24-07
Available colours: NW WW
CRI: Min 90

The 24V high powered shelf light, SL-A-HO-24-07 consumes 23.9W/m, has completely diffused LEDs and produces 1474 lm/m in natural white.

It is ideally suited for retail shelf illumination. Available in Natural White CRI90 and specialty Meat CCT as standard.

Shelf Light SL-A-HO-24-07
Available colours: NW WW
CRI: Min 90

The 24V medium powered fridge shelf light, Bravo-S consumes 12.4W/m, has a reflector optimized for fridge cabinets and produces 1097 lm/m in natural white.

It is ideally suited for fridge cabinets and wall wash applications. Available in Natural White CRI90 as standard.

Fridge Shelf Light Bravo-S
Available colours: NW WW
CRI: Min 90

The 24V high powered fridge canopy light, Bravo-HO-S consumes 23.9W/m, has a reflector optimized for fridge canopies and produces 1920 lm/m in natural white.

It is ideally suited for fridge canopies and wall wash applications. Available in Natural White CRI90 as standard.

Fridge Canopy Light Bravo-HO-S
Available colours: NW WW
CRI: Min 90

The CANL140-S is our new compact surface mount 140W LED canopy light, comprising IP65 LED modules, driver and a corrosion resistant housing. The distribution is optimised for petrol station canopies and the housing is anodised aluminium and powder coated 3CR12 stainless steel. It has a hinged connector plate for easy mounting and wire connection. Occupancy/daylight dimming available on request.

Canopy Light CANL-140-S
  Mounting   Dim/Non Dim Plug Power  (W)       Luminaire   Output  Beam  Angle    Fitting  Colour
 CW (5700K)
 Surface on request  134 16 627 Canopy Wt
Available colours: NW WW
CRI: Min 70

The CANL140-R is our new compact recessed 140W LED canopy light, comprising IP65 LED modules, driver and a corrosion resistant mounting plate. The distribution is optimised for petrol station canopies and the housing is anodised aluminium and powder coated 3CR12 stainless steel. It has a hinged connector plate for easy mounting and wire connection. Occupancy/daylight dimming available on request.

Canopy Light CANL-140-R
  Mounting   Dim/Non Dim Plug Power  (W)       Luminaire   Output  Beam  Angle    Fitting  Colour
 CW (5700K)
 Recessed on request  134  16627 Canopy Wt
Available colours: NW WW
CRI: Min 70

The STR-35 is our new pole mount 35W LED street light, comprising Osram LEDs and a DALI/switchDIM driver in an IP66 corrosion resistant housing. Lens distributions are optimised for street and perimeter lighting. Optional 10kV surge protection device available.

Street Light STR-35
  Mounting   Dim/Non Dim Plug Power  (W)       Luminaire   Output  Beam  Angle    Fitting  Colour
 CW (5700K)
 Pole DALI  33.5 4025 30°, 55°, 90°, Street, Flood etc. Bk
Available colours: NW W
CRI: Min 70

The STR-50 is our new pole mount 50W LED street light, comprising Osram LEDs and a DALI/switchDIM driver in an IP66 corrosion resistant housing. Lens distributions are optimised for street and perimeter lighting. Optional 10kV surge protection device available.

Street Light STR-50
  Mounting   Dim/Non Dim Plug Power  (W)       Luminaire   Output  Beam  Angle    Fitting  Colour
 CW (5700K)
 Pole DALI 50.2 6037 30°, 55°, 90°, Street, Flood etc. Bk
Available colours: NW W
CRI: Min 70

The STR-105 is our new pole mount 105W LED street light, comprising Osram LEDs and a DALI/switchDIM driver in an IP66 corrosion resistant housing. Lens distributions are optimised for street and perimeter lighting. Optional 10kV surge protection device available.

Street Light STR-105
  Mounting   Dim/Non Dim Plug Power  (W)       Luminaire   Output  Beam  Angle    Fitting  Colour
 CW (5700K)
 Pole DALI 100.4 12074 30°, 55°, 90°, Street, Flood etc. Bk
Available colours: NW W
CRI: Min 70

The L56-W2 is a 560mm long Zhaga compliant linear LED module with 42 Osram LEDs. Ideal for fluorescent replacement in panel or linear lights. CRI 90 and custom CCTs available on request.

L56-W2 Module
Module Drive Current (mA) 
DC Power/Module (W)   Module Luminous Flux (lm)
 Beam Angle (°C)
WW (3000K) NW (4000K) W (6000K)
150  6.3 1080
1080 1080 120
250 10.5 1742 1742 1742
350 14.7 2370 2370 2370
400 16.8 2680 2680 2680
500 21.0 3262 3262 3262
Available colours: W NW WW
CRI: Min 80

The L28-W2 is a 280mm long Zhaga compliant linear LED module with 21 Osram LEDs. Ideal for fluorescent replacement in panel or linear lights. CRI 90 and custom CCTs available on request.

L28-W2 Module
Module Drive Current (mA) 
DC Power/Module (W)   Module Luminous Flux (lm)
 Beam Angle (°C)
WW (3000K) NW (4000K) W (6000K)
150 3.2 540
540 540 120
250 5.3 871 871 871
350 7.3 1185 1185 1185
400 8.4 1340 1340 1340
500 10.5 1631 1631 1631
Available colours: W NW WW
CRI: Min 80

The L56-W2-HO is a 560mm long Zhaga compliant linear LED module with 42 Osram LEDs. Ideal for fluorescent replacement in panel or linear lights. CRI 90 and custom CCTs available on request.

L56-W2-HO Module
Module Drive Current (mA) 
DC Power/Module (W)   Module Luminous Flux (lm)
 Beam Angle (°C)
WW (3000K) NW (4000K) W (6000K)
350 14.7 2027
2027 2027 120
500 21 2826 2826 2826
700 29.4 3830
3830 3830
900 33.6 4766
4766 4766
1050 44.1 5425
5425 5425
Available colours: W NW WW
CRI: Min 80

The CL220-15 is a 74mm diameter circular driver on board (DOB) LED module with 15 Samsung LEDs. 0.97 Power factor. Ideal for bulkhead lighting or downlights

CL220-15 Module
Product Code
Plug Power (W)
Module Luminous Flux (lm)
 Beam Angle (°C)
CL220-15-NW 15.6 1366
120
CL220-15-WW 15.6 1297
Available colours: NW WW
CRI: Min 80

The CL220-30 is an 87mm diameter circular driver on board (DOB) LED module with 30 Samsung LEDs. 0.97 Power factor. Ideal for bulkhead lighting or downlights

CL220-30 Module
Product Code
Plug Power (W)
Module Luminous Flux (lm)
 Beam Angle (°C)
CL220-30-NW 30.4 2858
120
CL220-30-WW 30.4 2713
Available colours: NW WW
CRI: Min 80

The ML4 is an LED module containing 4 x 1.2W Osram LEDs. It has been designed to fit into a standard down light ring and has the same diameter as a 50W dichroic lamp.

It can be used as a replacement for the 35W or 50W halogen down lighter and is ideal for new or retrofit applications.

Module Light ML4
  Cut Out Size (mm)   Dim/Non Dim Plug Power (W)     Luminaire Output  Beam Angle    Fitting Colour
WW (3000K) NW (4000K)
 n/a Non Dim  6 400 431 12,22,36 Al
Available colours: NW WW
CRI: Min 80

The ML5 is an LED module containing 5 x 1.2W Osram LEDs. It has been designed to fit into a standard down light ring and has the same diameter as a 50W dichroic lamp.

It can be used as a replacement for the 35W or 50W halogen down lighter and is ideal for new or retrofit applications.

Module Light ML5
  Cut Out Size (mm)   Dim/Non Dim Plug Power (W)     Luminaire Output  Beam Angle    Fitting Colour
WW (3000K) NW (4000K)
 n/a Non Dim  7 500 539 12,22,36 Al
Available colours: NW WW
CRI: Min 80

The ML6 is an LED module containing 6 x 1.2W Osram LEDs. It has been designed to fit into a standard down light ring and has the same diameter as a 50W dichroic lamp.

It can be used as a replacement for the 35W or 50W halogen down lighter and is ideal for new or retrofit applications.

Module Light ML6
Cut Out Size (mm) Dim/Non Dim Plug Power (W) Luminaire Output  Beam Angle  Fitting Colour
WW (3000K) NW (4000K)
n/a Non Dim  8 590 636 12,22,36 Al
Dim/DALI  8.7
Available colours: NW WW
CRI: Min 80

The ML7 is an LED module containing 7 x 1.2W Osram LEDs. It has been designed to fit into a standard down light ring and has the same diameter as a 50W dichroic lamp.

It can be used as a replacement for the 35W or 50W halogen down lighter and is ideal for new or retrofit applications.

Module Light ML7
Cut Out Size (mm) Dim/Non Dim Plug Power (W) Luminaire Output  Beam Angle  Fitting Colour
WW (3000K) NW (4000K)
n/a Non Dim  8.7  720 776 12,22,36 Al
Dim/DALI  9.6

 

The ML7 is an LED module containing 7 x 1.2W Osram LEDs. It has been designed to fit into a standard down light ring and has the same diameter as a 50W dichroic lamp.

It can be used as a replacement for the 35W or 50W halogen down lighter and is ideal for new or retrofit applications.

Available colours: NW WW
CRI: Min 80

The ML4H-Diff is a diffused LED module containing 4 x 2.4W Osram LEDs. It has been designed to fit into a standard down light ring and has the same diameter as a 50W dichroic lamp.

It is ideal for new or retrofit applications where a wide beam angle and diffused look is required.

Module Light ML4H-Diff
Cut Out Size (mm) Dim/Non Dim Plug Power (W) Luminaire Output  Beam Angle  Fitting Colour
WW (3000K) NW (4000K)
n/a Non Dim  10.8 631 683 70 Al
Dim/DALI  11.5
Available colours: NW WW
CRI: Min 80

Ceiling Box for surface mounting of the CL6,CL7, CL4H-Diff, CL5H-Diff and COB10 (i.e. 74mm Cut/out)

CB-74
Cut Out Size (mm) Dim/Non Dim Plug Power (W) Luminaire Output  Beam Angle  Fitting Colour
WW (3000K) NW (4000K)
74 N/a N/a N/a N/a N/a Wt
N/a  N/a

Ceiling Box for surface mounting of the CL12, CL6H-Diff, CL7H-Diff, COB15 & Curve Fittings (i.e. 90mm Cut/out)

CB-90
Cut Out Size (mm) Dim/Non Dim Plug Power (W) Luminaire Output  Beam Angle  Fitting Colour
WW (3000K) NW (4000K)
90 N/a N/a N/a N/a N/a Wt
N/a  N/a

Ceiling Box for surface mounting of CL19, CL12-Diff, CL19-Diff, CL24-Diff & COB35 (i.e. 140mm Cut/out)

CB-140
Cut Out Size (mm) Dim/Non Dim Plug Power (W) Luminaire Output  Beam Angle  Fitting Colour
WW (3000K) NW (4000K)
140 N/a N/a N/a N/a N/a Wt
N/a N/a

Ceiling Box for surface mounting of CL12-Dish160 (i.e. 160mm Cut/out)

CB-160
Cut Out Size (mm) Dim/Non Dim Plug Power (W) Luminaire Output  Beam Angle  Fitting Colour
WW (3000K) NW (4000K)
160 N/a N/a N/a N/a N/a Wt
N/a  N/a

Ceiling Box for surface mounting of CL19-Dish200 or CL24-Dish200 (i.e. 200mm Cut/out)

CB-200
Cut Out Size (mm) Dim/Non Dim Plug Power (W) Luminaire Output  Beam Angle  Fitting Colour
WW (3000K) NW (4000K)
200 N/a N/a N/a N/a N/a Wt
N/a  N/a

The DPCDIM-300 is a dimmer which converts the DALI signal to Phase Angle. This allows non-DALI dimmable drivers to communicate with the DALI Controller.

DALI PC
Cut Out Size (mm) Dim/Non Dim Max Plug Power (W) Luminaire Output  Beam Angle  Fitting Colour
WW (3000K) NW (4000K)
N/a N/a 300 N/a N/a N/a Wt
N/a

The PD3-Dim is a 300W Phase angle dimmer which operates with a Bell Press or Dimmer Switch.

PD3-Dim
Cut Out Size (mm) Dim/Non Dim Max Plug Power (W) Luminaire Output  Beam Angle  Fitting Colour
WW (3000K) NW (4000K)
N/a N/a 300 N/a N/a N/a Wt
N/a
For the last 4 years Nedbank has used LEDwise as its preferred supplier for signage illumination during their national branch upgrade project. The LEDs are used for the halo illumination of the signs as well as for the backlighting of the Nedbank and other text.
Nedbank rolls-out with LEDwise
Important factors to consider when doing a brand roll-out of a new image is to ensure that the signage is illuminated properly and that this illumination is consistent across all sign types, sizes and sites. In the early stages LEDwise provided input into the design from a technical lighting perspective and now supplies installation drawings to all the signage companies to reduce the chance of installation errors.
 
When dealing with external illumination it is important that the lighting product can take into consideration important factors like UV radiation, heat, expansion and contraction, corrosion and weatherproofing.
 
For Nedbank’s application, we used our IP rated light line product. This is 3.2W/m, LED light Line using Osram LEDs and is supplied in an aluminium extrusion, resin coated for external use and anodised for coastal conditions. The colour of the light was specified by Nedbank and LEDwise’s narrow colour bin selection ensures colour consistency across all signs and sites.
 
 
The wire connections are provided by pluggable IP67 molex connectors and Helutherm UV resistant wire. The system is provided as a ‘plug and play’ solution for the signage contractors to make installation easier and to prevent wiring mistakes. 
 
All LEDwise products are proudly designed and manufactured in South Africa.
Please contact our Technical team for advice on your project’s requirements.

Lighting is one of the most important decisions when designing a shopping centre.

LED lighting provides an efficient choice where lighting needs to be utilised for at least 10 hours per day and maintenance costs need to be minimised.

As well as considering the overall energy cost of the luminaires chosen, an efficient range with the minimum number of different styles should be chosen to reduce maintenance costs and complexity.

Factors to Consider when Lighting Shopping Centres

 The mall illumination should provide a natural, comfortable atmosphere which improves the shopper’s experience and doesn’t detract from the stores.

mall 2

Helderberg Shopping Centre, Western Cape – CL24-Diff

Feature lighting and decorative lighting can be used to make entrances welcoming, striking and eye catching. 

mall 3

Helderberg Shopping Centre, Western Cape

Lighting can be used to highlight specific areas such as displays, signage and décor to make products stand out. 

mall 4

LL-A-24-25-B – a low powered blue LED light line used in Dion Wired.

Lighting for store signage should be uniform in intensity and colour so as to not detract from the store’s branding. Signage is typically on 24 hours per day so a high quality LED solution results in a very quick break-even period.

mall 5

Billabong, V&A Waterfront, Cape Town

Areas such as car parks and storage facilities, which are typically illuminated 24 hours per day, need efficient lighting which considers customer safety and adds to the overall architecture of the centre. Additional features such as occupancy and daylight sensing as well as emergency lighting have to be considered. Fittings in these areas should also be designed for ease of maintenance and cleaning.

mall 6

Gardens Shopping Centre Car Park, Cape Town

Cove lighting is important to the overall aesthetic of a shopping centre. Poor quality cove lighting can easily detract from the perceived quality of the stores. It should be seamless and provide excellent uniformity in brightness and colour along the length of the cove. 

mall 7

Ballito Junction Mall

Bathroom lighting should create the impression of a clean and safe environment through the use of high lux levels and diffuse lighting.

mall 8

 Bathrooms at Pavilion Mall

LEDwise ceiling lights, module lights, linear lights, cove lights and track lights are installed in shopping malls throughout South Africa and Africa.

All LEDwise products are proudly designed and manufactured in South Africa providing flexible ordering to two weeks’ lead time.

 

Contact the team of LEDwise engineers to discuss your requirements and for more information.

 

 

LEDwise is an Osram LED Light for You Solution Partner, one of only 2 companies in South Africa accredited for this. We have recently developed a locally assembled range of linear modules with Osram Opto-Semi-Conductors, and have received approval from Osram to put the ‘Osram LED Inside’ co-branding on the modules for sale in Africa. 
 
LEDwise Partners with Osram Opto-Semi Conductors to produce LED modules
 This is a first for this kind of product in South Africa. These modules have been tested by the Osram Premium Application Support Service (PASS) and the reports are available for customer review. All the modules are Zhaga compliant which means lighting manufacturers can interchange them easily with the modules they are presently using. By manufacturing locally, the modules avoid import duty and are thus very competitively priced. 
 
The following modules are available: L56-W2 (2300lm, 14.7W, 560mm long), L28-W2 (1150lm, 14.7W, 280mm long) and the L56-W2-HO (3830lm, 29.4W, 560mm long). All modules come with a 5-year warranty provided the Tc point is below maximum of 80 degrees. We can also assist with driver selection and application advice. 
 
For more information on our innovative locally-manufactured LED lighting modules please contact our team of South African engineers
 
Image and environmentally conscious retail brands like Billabong opt for LEDwise. Retail customers, in particular, appreciate how important the correct lighting is to the customer’s purchase decision.
 
This Billabong store in the V&A Waterfront Cape Town used the LEDwise Ceiling Light, CL24-Diff luminaire, for general illumination in the store. The diffused recessed light fitting consumes only 28W of power, produces 3298 lumens, and with a 95-degree beam spread is ideal for general illumination.
 
Selecting the right colour temperature for a fashion retail store is particularly important and LEDwise superior fine colour binning and high CRI options means the customer can rely on colour consistency throughout the store.
 
The LEDwise Ceiling Lights, Module Lights, Linear Lights, Light lines and Track Lights are all ideal for illuminating retail merchandise, aisles, display counters and point of sale aesthetically and cost effectively.
 
All LEDwise products are proudly designed and manufactured in South Africa.
Please This email address is being protected from spambots. You need JavaScript enabled to view it. for advice on your own requirements.
Billabong uses LEDwise
Commercial parking garages often require lighting to be on 24 hours per day making them an ideal area to save electricity by switching to more energy efficient LED solutions with break-evens of less than 2 years.
 
LEDwise has many high-quality luminaires ideal for use in parking garages. Our PL Range which was developed exclusively for Province Lighting is part of the LEDwise Linear Light range and is an example of a high-quality luminaire designed to consider the requirements of the installer. 
 
The fitting can be surface mounted using two concealed spring mounting clips and can only be removed using a special tool, thereby reducing the risk of theft. It can also be self-supported during the installation freeing up the contractor’s hands to allow him to do the electrical connection. 
 
A channel in the rear of the fitting allows for the conduit to be joined to the fitting for neat through connection without the need to open the fitting. Various dimming options are available, as well as PIR sensor and built-in emergency gear. 
 
Osram LEDs are used and are available with a frosted Brightview or slightly more cost effective Microlinear diffuser, all with a 5-year warranty.
 
 
All LEDwise lights are proudly designed and manufactured in South Africa. This email address is being protected from spambots. You need JavaScript enabled to view it. to discuss your requirements and for more information. 
 
LEDwise Parking Garage Lights

LEDwise are proud to be approved as a supplier of blue light lines and forecourt canopy lights for Sasol’s forecourts. Our blue LED light lines illuminate more than 120 of these impactful forecourts 365 days per year, while our highly successful range of LED Canopy Lights has thus far been installed at close on 20 sites nationwide.

The 24V blue light line consumes only 3.2W/m and is supplied in an anodised aluminium housing resin coated for external use. Current regulation on the printed circuit board ensures even light intensity up to 15m from the power supply. The light lines are supplied in pluggable 1.5m lengths and come fitted with stainless steel mounting clips for ease of installation. They create a seamless striking blue band of light.

Our 140W canopy light is available in a recessed or surface mount version (with a 5year guarantee) and contains 64 high-quality Osram LEDs. The housing is manufactured from anodised aluminium and the body from powder coated stainless steel. There is a by-pass diode for every LED meaning that in the unlikely event that one LED should fail, the other 63 will still function. Each fitting is equipped with a Goretex breather valve to allow harmful gases to escape and utilises high-quality lenses approved worldwide for forecourt illumination.

Both the blue light line and canopy lights are proudly designed and manufactured in South Africa.

LEDwise works closely with many blue chip clients to develop their optimal lighting solutions. Contact the This email address is being protected from spambots. You need JavaScript enabled to view it. for more information.

LEDwise, Sasol’s Nominated Lighting Supplier
 
The LEDwise highly successful range of  LED High Bay Lights has now been redesigned into a physically smaller more economical linear range.
 
Proudly designed and manufactured by our team in Cape Town, South Africa, they are available in power options of 35W, 70W, 105W, 140W, 175W and 200W. While reducing cost was the motivator for the redesign, we have not lowered the quality of the product. It is designed for L70 @ 70 000 hrs at an ambient operating temperature of 35 degrees, is fitted with Osram LEDs and comes with a 5 year warranty.
 
The power factor is > 0.97 and it has an overall system efficacy of 124lm/W. Standard available beam angles are 30°, 55°, 90°, flood and oval, making it suitable for a range of mounting heights from 5m to 25m in warehouses, distribution centres and factories. There is also an IP65 version for use in cold rooms and freezer rooms.
 
For more information on our high-quality locally-manufactured LED lighting solutions please This email address is being protected from spambots. You need JavaScript enabled to view it..
LEDwise High Bay Lights Reconfigured

 

LEDwise has recently added an in-house designed LED baton luminaire to their ever expanding portfolio of products. Available in lengths of 900mm, 1200mm and 1300mm with power ranging from 20W to 57W, it is a cost effective solution for replacement of open channel fluorescent fittings. Ideal for use in parking garages, retail shops, back of house areas and general area lighting.

Manufactured from extruded aluminium it can be powder coated to your preferred colour. It comes with an integrated driver with PF>0.95 and driver efficiency > 90% and has an overall system efficacy of 110lm/W.  Fitted with Osram LEDs it has a 5 year warranty. A channel on the top of the fitting allows for neat connection to 230V via top entry or through connection using conduit. Dimmable options are available, and it can also accommodate integrated emergency gear.

Contact the This email address is being protected from spambots. You need JavaScript enabled to view it. for more information. 

NEW BATON LIGHT launched as cost effective replacement for fluorescent fittings

LEDwise Lighting Pty Ltd. is an expert South African technical design and manufacturing facility of LED lighting solutions.

Our professional team comprising seven South African engineers, design and develop high-quality affordable LED lighting products. All products are assembled in our factory in Cape Town, and we distribute nationwide through our well respected and trusted distribution partners.

Since 2011 we have provided over 300,000 LED luminaires for many of South Africa’s blue chip businesses including Sasol, Woolworths, Nedbank, ABSA, Makro, Standard Bank and Pick ‘n Pay to name a few, and developed innovative solutions for hotels, shopping malls, distribution centres, boat yards, car parks, offices, freezer rooms and many more.

LEDwise - An Introduction

 We provide the retail, commercial and industrial market sectors with:

•             Products designed for a minimum of L70 @ 50000 hr lifetime 

•             Support from our highly experienced local team with over 90 year’s engineering experience

•             Flexible local manufacture with 2 week’s delivery lead time

•             A 5 year warranty on the LED module and luminaire for 24/7 operation

•             Superior fine colour binning ensuring colour consistency across orders

•             Comprehensive technical datasheets

•             IES files for our full product range

•             Virtual simulations using Relux

•             SABS approval

•             Lifecycle cost and break-even analysis

LEDwise specialise in applications where the lights will be utilised for 10 or more hours per day. We use best practice engineering in the design of our lighting products and procure the highest quality components from leading brands in the world.

Please contact us if you have any queries, we are always pleased to help and will be happy to advise you on our distributors for pricing.

 

For their internal illumination over the Deli, Bakery and Fresh Produce areas, Spar Store owners throughout South Africa are choosing LEDwise products.
LEDwise illuminates Spar Retail Stores
The focussed light from our COB35 recessed downlight, provides high illumination levels on the products, while the recessed reflector ensures low glare, thereby creating a comfortable shopping experience.
 
The COB35 uses a Bridgelux Chip on Board (COB) LED and is available in a wide range of colour temperatures including 3000K, 3500K, 4000K as well as CRI 80, 90 and 97. There are also specialist LED colours available to bring out the colours in Bread and Meat to ensure the product looks its best to the customer.
 
For more information on LED colour temperature and human-centric lighting read our next blog post by following http://bit.ly/LinkedInLEDwise
 
All LEDwise products are proudly designed and manufactured in South Africa.
Please contact our Technical team for advice on your project’s requirements.
 
 The Artscape Theatre in Cape Town now brings you the highest level of LED lighting in the canteen, passages and bathrooms across all 5 floors. This project features our CL6 for the canteen, COB15 for the passages and CL5H-diff for the bathrooms.
Artscape Theatre turns to LED
 
 A key part of the application was to resolve energy usage due to the high use requirements by a 14 000-square meter facility which operates around the clock. The CL6 which is an 8W low glare downlight (UGR < 16) at 3000K was used in the canteen where comfortable lighting was needed. The higher performing 15W COB15 in 4000K was used in the corridors where more functional lighting is required. The wide angle CL5H-Diff was used in the bathrooms to create high cylindrical lux levels.
 
A place where culture and performing arts come alive is now facilitated by LED technology, helping create appealing atmospheres with consistent light colour, quality and performance.
 
All LEDwise products are proudly designed and manufactured in South Africa.
 
Please contact our Technical team for advice on your own requirements.
 
 
LEDwise is looking for a Technical Sales Manager to work closely with our distributors and end clients to promote our LED products for projects and for new business opportunities. 
 
The successful applicant will need to be technically strong and ideally have LED and lighting industry experience with a proven track record of success in specification work and sales. 
We are recruiting!
Core functions will be:
 
•Provide product training and updates to our distributors
•Assist distributors with tender work including preparation of quotations, pricing and documentation
•Promote our products to Engineering Consultants, Architects, Interior Designers and other end users
•Prepare sales, training and presentation material
•Assist key end customers with specification development
•Investigate new business opportunities
•Prepare Relux layouts
•Provide advice on new products to add to our portfolio
 
 
The role will be based in Cape Town with frequent travel nationally and internationally.
 
If you are a self-starter, highly motivated and with a desire to work in a dynamic, innovative, rapidly growing company, then please send your CV and motivational letter to bruce@ledwise.co.za

Woolworths’ vision to be the most sustainable retailer in the Southern Hemisphere is driven by a combination of focus areas, one of which is to increase energy efficiency in their operations and shift to renewable energy sources.

Signage lighting is often required to run for 24hrs a day, attracting customers at night and maintaining a marketing presence in the community afterhours. Our high quality LED light lines are capable of producing in excess of 100 lumens per watt, meaning they will produce a great deal of light while using very little power. This translates to much lower monthly energy bills, particularly when the sign is on for 24 hours a day. The long life of LEDs also saves on maintenance costs, particularly for signs mounted high up on buildings, where access is very costly.

For the Woolworths signage, we use our LL-A-24-33-IP light lines. This product produces 1250lm/m and consumes 12.2W/m. It is supplied in an anodised aluminium extrusion suitable for coastal use and is resin coated to provide protection from UV light as well as water. We supply the light lines in discrete lengths with IP67 pluggable connectors on each end and 2 stainless steel mounting clips for ease of installation. Our LED light lines run off 24V and all have current control to ensure that the LED brightness does not drop along their connected length. For each sign type, we provide a wiring diagram so that the signage companies know exactly how many LEDs to connect to the power supplies.

Thus far LEDwise has supplied LED backlighting to over 700 Woolworths signs country wide resulting in considerable energy savings for this environmentally conscious brand.  

LEDwise is a specialist provider of high quality LED lighting solutions to the signage industry. We provide backlighting, light line and halo illumination solutions. PleaseThis email address is being protected from spambots. You need JavaScript enabled to view it. for advice on your project’s requirements.

Woolworths uses LEDwise for Sustainability Vision

Terms like L70, B10, F10 @ 60,000 hrs are often quoted in specifications but what do all these terms mean? Furthermore are the methods used to measure them standardised and universally adopted?

In order to answer these questions, we need to look at how these figures are derived.

 LED Lifetime

The lifetime data that we receive for LEDs from the manufacturers is generated by the combination of two standardised processes developed by the Illuminating Engineering Society (IES): an experimental measurement (IES LM-80-08) and a mathematical prediction (IES TM-21-11). A sample quantity of LEDs is tested to the LM-80 standard to determine the relative lumen output over time of the individual samples. This data, gathered over at least 6k hours but preferably over more than 10k hours, is then mathematically projected according to TM-21 to result in an industry standardised lifetime prediction. This lifetime prediction is called the “Rated lumen-maintenance life” and is defined in LM-80 as “the elapsed operating time at which the specified percentage of the lumen depreciation or lumen maintenance is reached, expressed in hours.” This is denoted as Lx where “x” is the specified percentage of the lumen maintenance. A common example is L70 50000h which means that after 50000 hours, the LEDs will emit at least 70% of their initial lumen output on average.

 LED Module Lifetime

The lifetime of an LED module is usually expressed in terms of its “useful life” denoted as LxBy. This is defined in IEC 62717 as “The length of time until a percentage y of a population of operating LED modules reaches gradual light output degradation of a percentage x”. For example, a useful life of L70B10 50000h means that after 50000 hours, 10% of modules will have degraded to 70% of their initial lumen output. The “median useful life” denoted as LxB50 indicates the time at which half of the modules have degraded to x% of their initial lumen output.

Where the B-value specifies gradual degradation in the lumen output of modules and luminaires, the C-value deals with abrupt lumen output and is defined as “The length of time until a percentage y of a population of LED modules reaches abrupt light output degradation of a percentage y is called the time to abrupt failure and expressed as Cy” (IEC 62717). For example, C10 of 50000h means that after 50000 hours, 10% of modules will fail to produce any light at all. It is uncommon to see C-values in the LED Lighting industry as it is rare for LEDs to fail catastrophically. 

The B and C values can be combined into a single lifetime called the “LED Lamp Life” expressed as “MxFy” and defined as “The length of time until a percentage y of a population of LED lamps reaches combined gradual and abrupt light output degradation, meaning the LED lamps have either parametrically failed, no longer producing at least x % of their initial luminous flux, or abruptly failed”

 LED Luminaire Lifetime

The IEC standard for Luminaire performance (IEC 62722-2-1) recommends that the same B, C and F values be specified at a luminaire level. 

However, as is stated in the standard: “Lifetime of LED luminaire can be far more than what practically can be verified with testing” – The maximum test time required for compliance with the standard is only 6000h and “Due to this limited test time, the claimed life of a LED luminaire cannot be confirmed nor rejected in most cases”. For this reason, it is necessary to make a mathematical projection of the test data to predict the lumen output of the luminaire at 50000 hours. Using a similar methodology to that of predicting LED lifetime, it is possible for luminaire lumen output to be tested and projected according to the relevant luminaire standards (IES-LM-84-14 and IES-TM-28-14 respectively). 

Unfortunately, as is the case with the lumen depreciation projection method for LEDs, the projection method used for luminaires uses an average lumen degradation based on a relatively small sample size. While this sample size is large enough to produce a reliable averaged projection of rated lumen-maintenance life, it is too small to produce a B-value of any statistical significance. And while the IEC standard makes recommendations on what lifetime metrics should be stated it does not define how those lifetime metrics should be calculated, or what lumen degradation projection method should be used.

At LEDwise, we design our luminaires to run the LEDs to at least L70 of 50k hours, but most of our LEDs will perform well above this minimum design requirement. We achieve this through applying our ‘belts and braces’ approach of ensuring excellent thermal performance of our luminaires, never over driving our LEDs, using high-quality LEDs from leading manufacturers and always considering the worst case. Due to the uncertainty in the determination of the B value for luminaires, we don’t believe it is a meaningful metric to compare luminaire lifetime. 

For more information on our LED lifetime conundrum, This email address is being protected from spambots. You need JavaScript enabled to view it. or follow LEDwise to stay updated on our latest innovations and industry news.

 
LED Lifetime Conundrum

Track lights are well suited for accent and display lighting applications or when a directional task light is needed. They are versatile, allowing flexibility in sizing, placement, and fixture styles. Track lights can be aimed at any product displays, countertops, walls, or other room features as needed, making them extremely useful for future store renovations or rearrangements.

LEDwise latest range of Track Lights

Our latest range of LED track lights are now available in even more colour temperatures and higher efficiency. Available in power ranges from 15W to 60W, we cover every power level and beam angle you might need. Made from high quality die cast aluminium and fitted with Bridgelux Chip on Board (COB) LEDs, our efficiency is unparalleled. They come standard with a 5-year warranty to give you complete peace of mind that LEDwise will be the correct partner for your retail lighting application.

Suitable for indoor use in retail, shops, restaurants, and architectural applications. 

All LEDwise products are proudly designed and manufactured in South Africa.

Please contact our Technical team for advice on your project’s requirements.

We are looking for a Production Manager to join our highly capable engineering team and run our production facility in Observatory, Cape Town.

If you are passionate about process improvement, have great attention to detail and can supervise and manage factory staff, then perhaps this role could be for you. 

We are recruiting!

Additionally, if you are innovative in your thinking, can see the bigger picture while being knowledgeable in production theory, and have worked with MRP systems previously please consider applying. A degree or diploma in Industrial Engineering or Production Management will be an advantage.

The role will involve the following:

  • Setting daily, weekly and monthly production schedules
  • Providing feedback to clients on order delivery dates
  • Managing procurement and inventory
  • Managing the Production Controller as well as Store Person
  • Supervising factory staff and drivers
  • Overall responsibility for the MRP system ensuring accuracy is established and maintained
  • Provide production reports to management
  • Establish methods for production improvement

If you believe you are suitable for this role, then please e-mail a motivational letter, salary expectation and a copy of your CV to bruce@ledwise.co.za

The demand for energy efficiency and optimised lighting has resulted in customised LED solutions being developed for every industry and application. Supermarket illumination and specifically aisle illumination have until recently been accomplished entirely with the use of linear fluorescent luminaires. These have been developed over decades to result in optimised high performing solutions which use around 60W/m and produce 3740lm/m. This equates to 63lm/W and produces around 680lx on the floor and 480lx on the shelves (for a 3.6m mounting height and 2m aisle width, 0.8MF).

Supermarket Aisle Illumination

The challenges involved in designing a cost effective LED solution which outperforms these fluorescent luminaires have only recently been overcome. This is due to the improvement in both lm/W and lm/R of suitable LEDs as well as with the development of advanced LED optics. These optics allow the LED luminaires to do what the fluorescents can’t: focus more light on the product and less light onto the floor and tops of the shelves. What’s required to do this is a batwing distribution with a high degree of nadir suppression. Two typical distributions of a high performing LED vs fluorescent luminaire are shown below. 

 

led fluo asle graph

 

The improved performance of LED vs Fluorescent can easily be seen by comparing their performances in a Relux simulation. It is clear that the LED luminaire places more of the available light on the shelves while wasting less on the floor and tops of the shelves. The ideal 1:1 ratio of lux on the floor and shelves can be achieved if the correct lens is selected for the application: 

 

led fluo asle lighting

Many retailers also prefer a ‘continuous line of light’ which is deemed to be less distracting for the consumer. Luminaire designs should reduce glare to create a comfortable shopping environment.

LEDwise has a number of high-performing linear lighting products capable of producing 1000lx on both the floor and shelves (for a 3.6m mounting height and 2m aisle width) at 48W/m and 6570lm/m, which equates to over 135lm/W. Previously these lux levels were only achievable using 2 x 58W high performing fluorescent luminaires, consuming 85W/m. Numerous other power options and beam distributions are available. Simple attachment to P2000 trunking is via mounting clips and spring nuts, together with through connection of 220VAC via pre-installed connectors resulting in extremely quick installation.

Please contact our Technical team for more information on these innovative products.

 

Nautic South Africa specialises in the design and construction of highly customised ships.

Their new Ship Building Facility in Paarden Eiland, Cape Town utilises more than 150 of the LEDwise HB-140 high Bay lights. The luminaires are installed at a mounting height of 19m and provide the required lux to ensure that the high-quality levels during manufacture of the vessels can be maintained.

Nautic Ship Builders use LEDwise High bay Lights

The HB-140 high bay light consumes 140W and produces close on 16000 lumens with a power factor greater than 0.9. The LEDs are from Osram and the lenses, which are supplied by Finnish manufacturer LEDil, allow for a range of mounting heights and distributions to suit a variety of applications from 20m to 5m installation heights. The high bay luminaires come with a 5-year warranty and are assembled in our Cape Town factory.

LEDwise’s range of high bay lights offer optimal lighting conditions for high commercial spaces such as warehouses, distribution centres, factories and storage areas.

Our team of South African engineers enjoy a large challenge. Please contact our Technical team for advice on your project’s requirements.

Canopy lights serve an array of applications and are designed to be placed above the lighting area to provide balance and direct the light. Well suited for petrol stations, warehouses, drive-thrus and other low bay areas. Our range of canopy lights deliver high lighting levels and are exceptionally easy to handle and install. 

LEDwise new Canopy Light

The CANL-140-S is LEDwise’s new surface mounted LED canopy light. Consuming only 134W it produces 16,627lm. It is comprised of IP65 LED modules, driver and a corrosion resistant housing. The distribution is optimised for petrol station canopies. The module is made from anodised aluminium while the housing is powder coated 3CR12 stainless steel. The hinged connector plate allows for easy mounting. Occupancy/daylight dimming is available on request. A recessed version, designated the CANL-140-R, is also available. Please visit, Canopy Lights for more information. 

LEDwise range of canopy lights offer a unique combination of reliability, affordability, energy efficiency and ease of installation and maintenance. 

All LEDwise products are proudly designed and manufactured in South Africa.

Please contact our Technical team for advice on your project’s requirements.

Even though vision is so inherently part of our everyday lives, it is extremely difficult to describe, quantify and scientifically measure. The human eye responds differently depending on brightness and colour, not all eyes are the same and even if they were, individual colour memories of familiar objects and each person’s individual tastes and preferences mean that there is very little common data to work with. This doesn’t mean however that attempts haven’t been made to objectively quantify light. If the performance of a light source can be accurately described, then it can be accurately reproduced, which as consumers is what we require. The complete output of a light source or SPD (spectral power distribution) can easily be measured with a photometer and the typical white LED’s output looks like this:

Light Quality Metrics Explained

graph1 new

The SPD above has peaks in power at the blue and yellow wavelengths. White LEDs actually produce blue light which is changed to white light when it passes through the specialised yellow phosphor coating of the LED - this is why white LEDs are yellow when off. Although all of the light’s characteristics are on this graph, it is obviously not possible by looking at it to visualise how it will perform in the real world when illuminating objects of different colours. The most common metrics used in the industry to describe a light source today are:

CCT                    Correlated Colour Temperature (K) – The colour of light that a perfect radiator would emit if it was heated to this                                temperature. The sun, which is regarded as a black body (perfect) radiator as seen in the sky is at about 5600K.

CRI                      Colour Rendering Index – Commonly described as the ‘naturalness’ of a light source.

 

It is widely assumed that these two metrics alone are able to wholly describe the characteristics of a light source e.g. an 840 58W fluorescent would emit light at 4000K and a CRI of 80. CCT and CRI both have shortfalls however. Specific CCTs cover colours which fall on either side of the black body locus and so two light sources both with a CCT of 3000K can have noticeably different hues. The constant CCT lines can be seen running perpendicular to the black body locus in the CIE chart below. The 3000K line can be seen ranging from yellowish white to purplish white.

graph2 new

CRI is calculated by comparing the illumination of 8 colours by the test sample to that of the standard illuminant, with a perfect match equalling a CRI of 100. The 8 standard colours are shown below.

graph3 new

These colours are all regarded as pastel shades, with the light source’s rendering of more saturated colours not being regarded. Further problems include:

  • CRI was developed over 40 years ago for fluorescent technology and has remained largely unchanged since, even though lighting technology has developed hugely
  • Because the rendering of the eight samples is averaged, the contribution of any single large deviation is diminished
  • Two luminaires with completely different SPDs and completely different colour rendering capabilities can have the same CRI.
  • Manufacturers can ‘tune’ their LEDs to have an artificially high CRI, with poor individual colour performances (often red rendering)

Very important differences in light source performance which are not included in common specifications are:

 graph4 new

Attempts are constantly being made to add metrics to improve the way in which light sources are specified. Some of these present in the industry today include:

MacAdam Ellipses  - The results of a statistical test based method of determining the average person’s ability to notice the differences between similar colours. The specification of finer MacAdam steps means that fewer people will notice a difference in colour between different test samples. An example would be a 3 Step MacAdam specification. 

graph5 new

Colour Quality Scale (CQS)  - Similar to CRI, but with 15 colour samples instead of 8. This results in a much wider measure of rendering performance.

graph6 new

Gamut Area Index (GAI)  - Area encompassed by the chromaticity coordinates of the 8 colour samples used for CRI. This evaluates the saturation or vividness of the rendered colours. GAIs of 90 – 100 are considered ideal.

graph7 new

White Body Locus  - An experimentally determined line in the colour space showing which hues are considered the whitest at each CCT by most people.

graph8 new

Even more detailed metrics are being proposed which will specify other areas of performance:

Feeling of Colour Index (FCI)                                    - High colour saturation results in high image clarity

Harmony Rendering Index (HRI)                              - Quantifies the distortion of colour harmony caused by different light sources

Categorical Colour Rendering Index (CCRI)           - Errors in colour rendering will shift the categorical colour names of some object colours

Memory CRI (MCRI)                                                   - Memory colours of familiar objects are used as reference to evaluate colour rendering

 

As can be seen from this article, the complexities involved in quantifying and ultimately specifying a light sources performance are steadily increasing as the industry’s demands become more detailed and specific. Keeping up to date with all of the metrics involved is vital to ensuring the best solutions to lighting challenges are provided.

In our next article, we will describe which metrics are suitable for each application so be sure to follow LEDwise on LinkedIn to stay updated. 

 

Written by Daniel Prozesky, LEDwise Lighting

 

Recessed ceiling lights are a great source of illumination in an area which requires a minimalistic approach, and avoid clutter. They are versatile, providing both ambient and task lighting for almost any space. Low ceilings are especially favourable with recessed lights as they do not protrude from the ceiling. 

LEDwise New Ceiling Light

The COB35-RT is a retractable and rotatable LED ceiling luminaire containing 1 x 35W Osram Chip on Board LED. Consuming only 34.8W it produces 3570 Lumen Output. The distribution is optimised for retail, restaurants, and architectural indoor use. Available in natural white, warm white and speciality CCTs. For meat, bread, health, and CRI 95 décor CCTs (correlated colour temperatures) are also available. Beam angles of 15°,30°,45°,60° are achievable. Please visit Ceiling Lights for more information.

LEDwise range of ceiling lights offer a unique combination of reliability, affordability, energy efficiency and ease of installation and maintenance.

All LEDwise products are proudly designed and manufactured in South Africa.

Please contact our team of South African Engineers for advice on your product requirements.

Which light metrics should you specify for your application?

 Our previous article explained the various LED colour metrics commonly used in the industry. This article now describes which metrics should be specified for different applications.

CCT (Correlated Colour Temperature) and CRI (Colour Rendering Index) are traditionally the standard industry terms used to specify the light produced by a luminaire. Ever improving LED technology, however, together with more discerning and demanding consumers, has resulted in LED manufacturers creating many customised and optimised outputs.

Attention Lighting Specifiers

Specialised CCTs, such as Meat and Bread have been carried over into LEDs from fluorescent technology, and their uses are self-explanatory. Each LED manufacturer, however, has developed differing approaches to optimizing lighting and even when there are similarities, their unrelated terms give little clue as to their actual performance. Brilliant Mix, Class A, Vivid, Décor, CRI97 and Ultra-White are just a few of the terms used to describe specialised LEDs currently available.

The general rules that we follow to help us select the correct luminaires are as follows:

 

 Exterior Lighting

During the day, we use our highly colour sensitive photopic vision. At night, however, the colour becomes less important and more lux sensitive scotopic vision takes over. The eye’s sensitivity curve (known as the luminosity function or V(λ) curve) also shifts its peak sensitivity wavelength from yellow to blue. This is why higher colour temperatures are used for exterior LED lighting – usually 5000K and above, with 5700K and 6500K being common. Exterior lighting is largely used for safety reasons, and so high lux levels are deemed to be more important than light quality. This is why monochromatic sodium vapour lamps (up to 200lm/W) are traditionally used for streetlights, despite their lower scotopic performance than higher CCT polychromatic light sources. Thus high CRI is also usually not required for exterior lighting. LEDs can now have good CRI and high efficacy so CRI > 70 is usually considered to be sufficient, with luminaire manufacturers taking advantage of the lower CRI LEDs’ higher efficacy. 

 

3 6

Interior Lighting – Domestic

LED lighting for homes has to try and replicate the feel of incandescent bulbs and so good CRI is essential (incandescent bulbs have a CRI of 100). CRI > 80 is standard and the CCT of the luminaire is largely determined by the room being illuminated, with personal taste being very important. Rooms which require an inviting, cosy ambience such as living rooms and bedrooms will use a CCT of 3000K or less. Kitchens and bathrooms, which require a brighter, crisper feel will use a CCT of 4000K and over.

 

4

 

Interior Lighting – Retail

Retail lighting design is much more technical, with much more scope for optimising lighting based on specific applications. The typical choice of CCT is still 4000K with CRI > 90 becoming the accepted norm. More and more LEDs which boost the vividness of colours – ideal for a retail environment – are becoming available. They also keep the ‘whiteness’ of white at the same time, regardless of CCT. Retailers have in the past felt that 3000K produces whites which are too ‘creamy’ while 4000K can create too much of a ‘cool’ appearance. 3500K was therefore selected as a middle ground – with the change in CCT being the only way to alleviate the problem. The choice of CCT will still be down to the individual retailer but the new generations of LEDs termed Vivid, Brilliant, Class A, Décor etc. allow 3000K to have bright whites and 4000K to have bright, rich colours. The excellent overall performance of these LEDs, both in colour rendering and enhancement and energy efficiency, therefore makes them an ideal choice for the retail environment.

 

7 2

 

 Interior Lighting – Industrial

For industrial illumination, such as task lighting and warehouse lighting where 24 hour per day operation is common, the focus is primarily on high lux levels and lm/W performance. Higher CCTs of 5700K and 6500K are popular with CRI > 70 usually found acceptable. Some retailers like to have a constant CCT from warehousing, through to despatch and finally in the store, with 4000K then being the most appropriate choice.

 

6

 

LEDwise development engineers keep up to date with the performance of all of the current LEDs and can help you to optimise your lighting solutions. Please contact our Technical team for advice on your project’s requirements.

 

 

Recessed ceiling lights are one of the most popular modern lighting options for hotels, offices, shops, restaurants, reception counters and display cabinets. Also referred to as downlights, they provide ambient lighting, task lighting, or accent lighting while remaining unobtrusive because the lights are recessed into the ceiling.

LEDwise Ceiling Light - COB10

The COB10 is a recessed LED ceiling luminaire containing 1 x 10W Bridgelux COB (Chip on Board) LED. High CRI and specialty CCTs are available. It can be used as a replacement for the 35W or 50W halogen down lighter and is ideal for new or retrofit applications. Available in Natural and Warm White, the COB10 is dimmable and has a beam angle of 36°.

 LEDwise’s range of ceiling lights offer a unique combination of reliability, affordability, energy efficiency and ease of installation and maintenance.

All LEDwise products are proudly designed and assembled in South Africa.

Please contact our team of South African Engineers for advice on your product requirements.

LEDwise has supplied their diffused recessed downlights to a large number of Pick n Pay Express stores nationwide. The 15W, CL12-Diff model is used in the restrooms, while the 22W CL19-Diff model is used on the portico and in the Wild Bean Café.

 

Pick n Pay Express uses LEDwise

These 2 high-quality fittings are both housed in the same luminaire body and ensure a consistent look across the store while at the same time providing the required light levels for the various mounting heights. Both fittings contain high-quality Osram LEDs, a white optic reflector and a Brightview diffuser for optimum light control and efficiency.

The heatsinks are fabricated from multiple thin walled tubes allowing for excellent thermal dissipation. This innovative design ensures that the weight of the fitting is much lower than more conventional die-castings or extrusions while the large surface areas ensure that the life of the LED is well in excess of 50,000 hrs.

All LEDwise products are proudly designed and manufactured in South Africa.

Please contact our Technical team for advice on your project’s requirements.

LEDwise offers a range of high quality LED Light Lines. Designated the LL-A-24-25, LL-A-24-33, and LL-A-24-14 are available in power levels of 3.2, 12 and 25 W/m respectively. Suitable for interior and exterior use they are ideal for use in cove lighting, façade illumination, shop fitting, shelf lighting, cabinet illumination, and signage. 

LEDwise Locally Manufactured LED Light Lines

The LEDs are from Osram with very tight colour binning to ensure consistent illumination. Each circuit board is designed with current control to ensure current through the LEDs is consistent even as the voltage drops along the light line length. This consistent drive current ensures LED longevity and even luminous intensity down the line. The circuit boards are fitted into a low profile aluminum extrusion anodised for coastal conditions while the 24V operating voltage enables long linear lengths can be connected reducing the number of power supplies required. The light lines are modular and supplied in fixed lengths with pluggable connectors to prevent incorrect connection and to allow for quick assembly. The lead wire on each connector is made from UV stable wire which will not age and crack. There is the option of a diffused or clear cover while for the IP65 version,  UV stable resin ensures complete protection of the LEDs. Each length is provided with 2 stainless steel mounting clips.

This product line has an outstanding track record of success having been installed in interior and exterior applications for the last 6 years in South Africa and numerous other African countries. It has been the product of choice for many of South Africa’s blue-chip clients with more than 100,000m currently in operation.

They are all manufactured by LEDwise in our Cape Town factory.

Please contact our team of Engineers for more technical information. 

The brand-new Woolworths Distribution Centre in Montague Gardens, Cape Town is nearing completion. LEDwise supplied almost 500 of their 200W Linear High Bay Lights through distributor Province Lighting. Distribution Centres need lighting solutions that precisely illuminate very large areas or very narrow areas from a great height, and are durable enough to withstand environment conditions such as fluctuating temperatures and corrosive atmospheres.

Woolworths Distribution Centre Illuminated by LEDwise High Bay Lights

The Woolworths specification was onerous requiring a minimum of 200lux at 1m AFFL in the aisles with a mounting height of 12.3m. We were able to achieve this using 5 of our HBL-200-O fittings per row and using a very narrow lens designed by LEDil in Finland.  Each HBL-200 contains 96 highly efficient and robust Osram Oslon Square LEDs producing over 24000lm, with an overall system efficacy of 120lum/watt. A quarter of the fittings were supplied with Tridonic Dali Control gear and special plugs to enable easy installation onto the power rail.

The HBL range of high bay lights are proudly designed and manufactured by LEDwise in Cape Town and are available in power options of 70W, 105W, 140W, 175W and 200W. Many standard distributions are available with the possibility for custom designs. Containing Osram LEDs and anodised aluminium heatsink for good thermal management, they can be mounted to P2000 trunking or they can be suspended. Occupancy / daylight dimming available on request and an IP65 rated version is also available.

For more information on the LEDwise range of High Bay Lights please contact our team of South African Engineers.

Lighting design is both an art and a science. Architectural spaces thrive with the right mix of lighting, and recessed ceiling lights play a major role in creating attractive and pleasant environments. With the right lights, rooms are highlighted by their best features. 

LEDwise Ceiling Light – COB35-R

The COB35-R is a recessed LED ceiling luminaire containing 1 x 35W Bridgelux Chip on Board LED. It consumes only 34.8W and produces 3974 lumens. The available distributions of 15°, 30°, 45° and 60° mean that lighting can be easily optimised for retail, restaurant and architectural environments. Available in natural white, warm white and speciality CCTs for meat, bread, health and CRI 95 décor. Please visit Ceiling Lights for more information.

LEDwise range of ceiling lights offer a unique combination of reliability, affordability, energy efficiency and ease of installation and maintenance.

All LEDwise products are proudly designed and manufactured in South Africa.

Please contact our team of South African Engineers for advice on your product requirements.

Driver on Board (DOB) technology is becoming more common in LED Lighting products. There are several reasons for this. The price of the DOB module is significantly less than buying an LED module and a separate driver. Furthermore, by eliminating the need for an external driver, the housings that these modules are fitted into can be smaller and unsightly shadows often caused by external drivers mounted next to the LED module can be avoided.

LEDwise Driver On Board 220V Modules

Lighting manufacturers are finding that stock holding of DC modules as well as the various drivers to power them is becoming more extensive and costly. Being able to buy a readymade DOB module ex-stock from LEDwise is an advantage to these manufacturers which suits their procurement and stock holding strategies.

As a leading manufacturer of high-quality luminaires in South Africa, LEDwise has a very good reputation and record of accomplishment in the successful supply of retail, commercial and industrial luminaires. LEDwise is now able to offer high quality LED modules to luminaire manufacturers at very affordable prices.

The CL220-15 is one of the new locally designed and manufactured DOB 220V modules. It has a power of 15.6W and produces 1366 lum in 4000K colour, measures 74mm in diameter and is fitted with 15 Samsung LEDs. It boasts a Power Factor of 0.97 and is suitable for AC Input Voltage of 220-240 Volts. It has thermal regulation which reduces the light output if the temperature of the chip is too high and has an onboard MOV for surge protection. There is also a 30W version designated CL220-30. They are most suitable for Bulk Head Lighting and applications.

Find the most appropriate LED module to suit your needs by browsing the rest of our LED module collection here.

For more information on our innovative locally-manufactured LED lighting modules please contact our team of South African engineers.

LEDwise has numerous points of difference in the South African industry, ranging from our expertise, to our work ethic to our production processes. As a customer of LEDwise you can rest assured that you are partnering with a company that excels in its field. Here are our 5 main differentiators:

LEDwise - 5 Points that set us apart from the Competition
  1. Proudly South African –  In keeping with our commitment to local development, all our fittings are assembled at our Cape Town factory. Our products are assembled by a team of dedicated and highly skilled individuals who maintain the high standards we’ve established since inception.
  2. Quality Engineering – Our lights are designed and built to operate for 24 hours per day, promising longevity and reliable performance. Quality control is essential, and a stringent quality control procedure ensures all products meet our exacting standards.  We provide accurate, measured data for all our products to ensure customer satisfaction. We have our own photometric laboratory and undertake lifetime tests on all our products.
  3. Dedicated Service – We pride ourselves communicating clearly, openly and consistently with our clients.  From quick turnaround of quoting projects to production, we ensure that our clients’ requirements are met and communicated.
  4. Product Development – An engineering culture, openness, flexibility, and the use and implementation of sophisticated technologies gives us the edge. The team has more than 100 years engineering experience and more than 40 years of experience in LED lighting. Our team of Electronic, Mechanical and Industrial engineers ensures LEDwise is ahead of the market in realising new concepts and sustaining an innovative mindset.
  5. Speed & Volume to Market – Our flexible local manufacture has led to the successful delivery of over 350,000 luminaires. We make all our products to order and have a standard lead time of 2 weeks – not bad considering we have over 120 products which can be configured in more than 12,000 combinations. 

For more information on LEDwise and what we offer please contact our team of South African engineers.

The Glide forms part of our wide-ranging collection of linear luminaires. Developed and manufactured locally, our range of Glide lighting products have been well received by those seeking easy, efficient, and cost-effective lighting solutions. With the progressive South African market in mind, the LEDWise team continually seek to further our contribution to the LED industry.

Glide Range of Linear Luminaires from LEDwise

Ideally suited for retail and general illumination, they are available in three standard lengths namely the Glide-900, Glide-1200 and Glide-1300. The design of the luminaire is unique in that the LEDs are concealed in a recess on each of the outer edges. The light from the LEDs is reflected off a white optic reflector and is thus indirect, and low glare.

These surface mount luminaire channel lights include Osram LED’s and either Osram or Tridonic control gear. They can be enhanced by additional features which are available on request. Added features include a dimmable DALI function, and a built-in Emergency Gear component. LEDwise offers these luminaires in an extensive selection of wattages between 29W and 95W, as well as a choice of a LED and luminaire colours.

Find the most appropriate LED Glide to suit your needs by browsing our Glide range here

For more information on our innovative locally-manufactured LED lights please contact our team of South African engineers.

Our innovative commercial refrigeration products have recently been installed in the food section of the new Woolworths store in Table Bay Mall, Cape Town.

Leading refrigeration display case manufacturer, Colcab, selected our slim line SL range for the undershelf lights in their new closed-door meat and dairy fridges.

LEDwise lights Woolworths Fridges

The design specification for this project required a product that could fit into a 16mm terry clip, allowing for ease of rotation whilst also ensuring diffused light output to eliminate unsightly reflections off shiny products packaging. The SL range also has a CRI>90 to ensure good colour rendering across a wide range of refrigerated products. Each 1.1m shelf light consumes only 13W which is a considerable power saving when compared to traditional fluorescent lighting.

 

4.jpg

 

Our new Bravo accent light has been installed in the upright linear fridges to illuminate both the base and shelves of the fridges. This unique product has a custom designed reflector built into the shape of the extrusion which minimises manufacturing processes and saves cost. The reflector shape was designed using ray tracing software to optimise illumination. Colcab also specified that they did not want the top bulk head illuminated as this can create distracting reflections. We successfully achieved this and in doing so contributed to ensuring a comfortable retail experience for all Woolworths customers. Each 1.1m long Bravo fitting consumes 26W, which is a significant power saving when compared to the 2 x 36W fluorescent options which were previously used.

 

1.jpg

 

For more information on our commercial refrigeration products please refer to the Light Lines section on our website, www.ledwise.co.za, or contact our team of engineers.

Lighting design has both functional and aesthetic elements, both of which need to be considered when choosing lighting for a particular space. With the correct choice of lighting, a room’s best attributes can be enhanced creating a better experience for all. 

LEDwise Ceiling Light-COB15

Our COB15 luminiare is a product that combines good looks with exceptional performance. It is a high performing functional LED luminaire that forms a part of our comprehensive range of Ceiling Lights. Containing 1 x 15W Bridgelux COB (Chip on Board) LED, it is available in both Natural and Warm White. It has lumen output of 1631 and a maximum power consumption of just 14.7W.  High CRI as well as a full range of specialty colour temperatures is available. It comes standard with a choice of non-dimmable, phase cut dimmable or DALI dimmable drivers all with high power factor.

The COB15 is an indoor light and is best suited to applications such as hotels, restaurants, offices and shops.

For some insight into this product’s application take a look at our article on the LEDwise fitting at the Artscape Theatre in Cape Town.

All LEDwise products are proudly designed and manufactured in South Africa.

Please contact our Technical team for advice on your own requirements.

The newly opened Table Bay Mall has 65,000m2 of retail space and is host to more than 150 stores. The mall design boasts both sophistication and modernity, drawing inspiration from the flowing lines and curvatures of the world’s most refined yachts.

LEDwise illuminates Table Bay Mall

The overarching design elements bring a sense of space, natural light and movement into the area whilst the incorporation of several innovative green-building technologies ensure its long-term sustainability. In keeping with its resolve to implement environmentally friendly practices, Table Bay Mall utilises LED lighting throughout the mall.

LEDwise is proud to be associated with this prestigious project. Through our distributor, Province Lighting, we supplied all the core interior mall lighting, decorative lighting above the shop windows as well as the luminaires in the lobby areas and bathrooms.

 table bay 1 2

 

The main mall lighting comprises of our COB35-STR and COB35-AGL product. With 35W Bridgelux LEDs and Tridonic control gear, this high quality die cast aluminium fitting was custom supplied for this project in order to meet the architect and engineer’s specification. Above each shop window are three of our CL1 Star Lights. The Star Light has an Osram Olson LED, a lens from world class manufacturer LEDil and locally machined housing. Our highly efficient COB10 downlight is fitted in the ticketing areas and bathroom passages, whilst the recessed CL7 LED is used in the bathroom itself.

 

table bay 3 4

 

For more information on these products or for assistance with your project’s requirements, please contact our team of engineers or visit our website, www.ledwise.co.za

 

How many times have you seen unrealistically short breakeven calculations showing a payback or break-even of a few months or a couple of years without clearly stating what all the assumptions are? There is often also no ability to modify the assumptions as the document supplied is a pdf. There are even some advertising brochures claiming break-even periods for a particular product while not even specifying the application conditions.

Break-even Calculations - Fact or Fiction

At LEDwise we developed our own Cost Comparison Calculator more than 5 years ago with the specific goal of removing the mystique from break-even analysis. A key feature of our model is that it allows the user to change any of the assumptions so there can be no by unscrupulous lighting suppliers.

Our model allows for comparison of one product directly against another. Luminaire and lamp costs are separated (purchase and maintenance costs) allowing for the comparison of new vs. existing installations.

The most important assumptions in any cost calculator need to be disclosed and agreed by the client.

These key assumptions are:

  • Cost of fitting, life of fitting
  • Cost of lamp, life of lamp
  • Cost of driver, life of driver
  • Number of fittings per site
  • Rated power of luminaire and actual power of luminaire (i.e. plug power)
  • Cost of electricity in year 1, 2,3, 4…10
  • Maintenance costs
  • Installation costs
  • Number of hours per day that the luminaire is used
  • Number of days per year that the luminaire is used

Here is a run through of an example of how the breakeven for a product can change based on the operating conditions. This will be done by comparing our CL19-Dish200 fitting against an existing 2 x 26W CFL downlight. I have excluded the cost of the CFL housing as the client already has this installed.

A very important consideration in this assessment is that we are comparing products that achieve the same lux levels in their installed application i.e. the CL19-Dish200 can replace a 2 x 26W CFL downlight and achieve similar lux levels.

The table below shows the input information:

 

Cost Calculator 0022679 

 

Case 1

For the first case study we have taken an office environment where the lights are only on for 10 hrs per day and not used on weekends i.e. 261 days per year.

Breakeven is calculated at just under 3.5 years as seen in the graph below.

 

Cl1

 

Case 2

If we now change from an office to a retail environment where the lights will be used 365 days per year and 10 hrs per day, the breakeven for the same product changes to 2.5 years.

 

 CL2

 

Case 3

If we now change to a hospital or 24 hour retail environment the breakeven changes to one year.

 

CL3

 

 

For more information on our Cost Comparison Calculator or to obtain your copy please contact our team of engineers.

 

LEDwise’ locally manufactured L56-W2 linear LED Module has been designed for OEM lighting manufacturers to use in their linear or ceiling mounted luminaires. The module is Zhaga compliant allowing for interchangeability with other modules on the market.

Linear LED Module – L56-W2

They are available in natural and warm white with CRI > 80 and have a power consumption of 14.7 W @ 350mA. At this power the lumen output is 2370 lumens and L80 > 50,000 hours at Tc = 80 Celsius. Each module has 42 Osram LEDs and is equipped with 4 small push-in Wago connectors allowing for series and parallel connection of multiple boards. Furthermore LEDwise have secured an agreement with Osram to allow Osram co-branding on the module.

A further advantage of this module is that it is electrically compatible with many drivers on the market. Having a standard drive current of 350mA means that the system cost can be reduced by selecting a driver with a standard drive current.

For more information on our innovative locally-manufactured LED lighting modules please contact our team of South African engineers

LEDwise is a leading manufacturer of LED lighting products for the commercial, industrial and retail market sectors. We are are looking for a Sales Consultant to work closely with our distributors and end clients to promote our LED products for projects and new business opportunities.

We are recruiting!

The successful applicant will need to:

  • Provide product training to our distributors
  • Promote our products to Engineering Consultants, Architects and Interior Designers
  • Exceed the specified sales targets
  • Develop and grow new business opportunities

The role is based in Cape Town with frequent travel required to other major centres.

If you are a self-starter, highly motivated with a good work ethic and would like to work in a dynamic, innovative growing company, then please send your CV, motivational letter and your expected remuneration to bruce@ledwise.co.za

If we do not receive all 3 of these, your application will not be considered.

As Day Zero looms, households and business across the Cape are battling to come to terms with the crippling reality of the drought. Risk to business operations is a pressing reality and we at LEDwise have had to evaluate the possibility of any hindrance to our ability to operate effectively during this time of water scarcity.

LEDwise Day Zero Implications

With the very nature of LED lighting being one of efficiency, at LEDwise we strive to maintain consciousness of the environment and consider the value of all resources during our day to day functioning.

LEDwise is fortunate enough to require no water in our manufacturing process and hence do not anticipate any significant disruptions to our operation after day Zero. Our water usage is limited to kitchen and bathroom areas where we have introduced hand sanitizers and turned off the urinals, whilst encouraging staff to be waterwise when flushing.

We have further encouraged our staff to implement various other methods of reducing water use in their homes. These include:

  • Keeping shower duration time to 90 seconds and turning off the water while using soaps & shampoos
  • Capturing grey water to flush toilets
  • Using hand sanitizers instead of washing hands under a running tap
  • Brushing teeth using a glass of water to monitor water use
  • Washing dishes in a bowl and using the excess to water the plants
  • Installing rain water catchment devices

Although water is currently our most vulnerable resource, LEDwise recognises the need to preserve other critical resources and as a result actively partake in environmentally sustainable practices.

Some of the things we do include:

  • Reuse of all packaging material that comes from our suppliers
  • Try to source as much local content to minimise our carbon footprint
  • Recycle all paper, glass, plastic & aluminium
  • Encourage our staff in their personal capacities not to purchase plastic bottles, use plastic packaging or use plastic straws

In doing the above, we endeavour to ensure our LED lighting products are as are just as sustainable in their manufacture as they are in their use!

 

LEDwise is a local manufacturer of high quality LED lighting products for the commercial, retail and industrial market sectors.

We are looking for a Business Development Director to significantly increase the sale of products offered by the company. As our key ambassador you will be challenged to grow the business to new heights, building off the solid base of successfully delivered projects.

Business Development Director Vacancy

The successful applicant will need to be technically strong, with excellent sales and interpersonal skills. Attitude determines you altitude in this position so you need to be self-motivated, ambitious, professional, presentable and enthusiastic. Reporting directly to the Managing Director you will be responsible for:

  • Significantly growing the sales of company
  • Strengthening relationships with our key distributors
  • Provide product training and updates to our distributors
  • Assist distributors with tender work
  • Promote our products to Engineering Consultants, Architects, Interior Designers, retailers and other end users
  • Prepare sales, training and presentation material
  • Assist key end customers with specification development
  • Develop new business opportunities
  • Management of internal sales personnel
  • Provide advice on new products to add to our portfolio

Since the product and applications are technical by nature, an understanding of all the technical lighting terms and lighting design terminology will need to be acquired.

The role will be based in Cape Town with frequent travel nationally and internationally as required.

If you believe you have what it takes to make a success of this position, then please send your CV, motivational letter and your expected or present remuneration to bruce@ledwise.co.za

Although a change in lighting technology is a big decision to make, deciding to switch to LED is always a wise choice for a retail business or showroom. The lighting solution that a business opts for needs to mesh well with the kinds of products that are being sold. Displays, signage and decor are instantly highlighted when the correct lighting is used. 

 

LEDwise supplies Dion Wired

LEDwise has supplied their blue LED light line to numerous Dion Wired stores for edge illumination of the audio-visual shelves. The blue light line designated the LL-A-24-25B consumes 3.2W/m, is fitted with Cree LEDs and current control to ensure even intensity.

 

 

LEDwise is proud to reveal their innovative new continuous LED line, the high-efficiency ACE . It has been designed with supermarket illumination requirements in mind, but is also suitable for warehouse and retail applications.  

The ACE can be used as a continuous linear light, with each length plugging easily into the next for up to 50m without an additional power point, or it can be used as a single luminaire.

LEDwise Launches the ACE Continuous Linear Light.

ACE L Black background12215

 

Several mounting methods are available including surface mounted and suspended mounting. The ACE has also been designed to clip onto P2000 trunking, making it an ideal lighting solution for retrofitting as well as new installations.

The ACE contains Osram LEDs, advanced lens technology, and a low ripple Tridonic or Phillips model driver. It is supplied in standard lengths of 1700mm though 850mm lengths are also available. Beam distributions include Aisle, Oval and 90 degrees. Several power options are also available depending on the required lux levels. CRI and colour temperature can also be specified while dimmable features and built-in emergency gear are available on request.

Locally designed and manufactured at our factory in Cape Town, the ACE comes with a 5-year warranty.

This exciting new product is a replacement for both open channel and high-performance fluorescents. Contact our team of South African Engineers to discuss your requirements or find out more on the ACE product page.

To read more on the ACE Continuous Linear Light in Engineering News click here. 

LEDwise has supplied their COB35 downlight through distributor Lighting Innovations, for the main mall lighting in Umlazi Megacity which is situated in the south of Durban.

LEDwise supplies Umlazi Mall

In total more than 500 downlights were installed throughout the mall area. In order to achieve a wider distribution angle the fittings were supplied with a Bright View diffuser to create a diffused rather than focussed lighting effect. This effect was favoured to create a wider beam angle from the luminaire which increases uniformity. Considering lighting in a mall area requires consideration of the shopper experience. Lighting should be natural, comfortable and not distract from the stores.

The COB35 is a 35W recessed LED ceiling light, with a Bridgelux chip on board (COB) LED and Tridonic control gear. It is available in 18 different LED colours and multiple beam angles.

For more on factors to consider when lighting shopping centres visit our article here.

To read more about the COB35-R you can check out the product page or contact our team of South African Engineers to discuss your requirements.

 

LEDwise has introduced a new range of diffused downlights. This new ‘Dish’ range has a low profile design with a sleek white front ring to achieve a clean, crisp look. 

LEDwise introduces new Dish range

There are 4 size options available to you, with cut-out sizes 95mm, 135mm, 170mm and 205mm. The products are designated the Dish95, Dish135, Dish 170 and Dish205. They are available in a number of power options from 7W up to 28W.  

Each Dish fitting has a white optic reflector, Osram LEDs and the option of a 5 year or 2 year warranty driver. The diffuser is UV stable, with high efficacy and creates a clean white look to the luminaire. Apart from the smallest model in the range, the efficacy of the luminaires is over 115lm/W with some achieving efficacy as high as 130lm/W. All the luminaires of this range are assembled locally in our Cape Town factory.

The Dish fittings are ideal for use in applications where a wide beam angle is required making them perfect for general illumination in a variety of spaces including offices, shopping malls, bathrooms, passages and store rooms.

For more information on this range and our other luminaires please contact our team of South African Engineers to discuss your requirements.

 

Success in the retail sector is driven by various elements. Enhancing the shopper experience is key. An important element is Store Design, which is carefully modelled to account for the floor plan, colour scheme, merchandising and lighting.The role of lighting is essential, with its contribution to a store’s ambiance as well as ability to draw customers to specific areas or products.

Mr Price Illuminated with LEDwise Ceiling Lights

Image conscious brands such as Mr Price opt for LEDwise as they appreciate the role of lighting in a customer’s purchase decision. Through distributor Province Lighting, LEDwise has supplied their 28W, CL24-Dish200 ceiling light to several Mr Price stores for illumination of the trading floor. The CL24-Dish200 is a high quality diffused LED downlight with Osram LEDs, Brightview diffuser, White Optic reflector and Tridonic control gear. Delivering over 3200lm from 28W this ceiling light is a very efficient fitting and ideal for use in areas requiring good general illumination.

Selecting the correct colour temperature is particularly important for a fashion retailer. LEDwise has a superior ‘fine colour binning’ (the exact shade of light can be specified again with each repeat order). LEDwise uses Osram LEDs with a high Colour Rendering Index. CRI is a measure of how accurately a light source is able to illuminate an object true to its colour. Customers can also rely on colour consistency throughout their store due to the narrow binning ranges selected by LEDwise. LEDwise manufactures various other retail appropriate luminiaires including ceiling lights, linear lights, light lines, module lights and track lights. The products under these ranges are ideal for retail illumination, effectively illuminating aisles, merchandise, display counters and point of sale areas in the most aesthetically pleasing and cost-effective way.

For more information on our locally-manufactured LED lighting lines please contact our team of South African engineers.

We are pleased to announce the appointment of two Business Development Specialists, we look forward to them meeting our customers and distributors over the coming weeks.

LEDwise New Business Development Specialists For Johannesburg and Cape Town

Charlton Opperman, Business Development Specialist, LEDwise Johannesburg

Charlton Opperman is the new Business Development Specialist for LEDwise Johannesburg. He is solutions-driven and customer-oriented and brings 15 years’ experience in industries including electrical, lighting and automation. He is passionate about design and inspired by innovative technologies. Charlton has completed courses including marketing and automation to entrepreneurship, and is currently studying towards an electrical engineering qualification.

Charlton was attracted to work at LEDwise due to the strong commitment to quality and the unique South African proposition.

charlton

‘The most exciting thing about being part of LEDwise is the opportunity to change the local lighting landscape!’

Pieter King, Business Development Specialist, LEDwise Cape Town

Pieter King brings his love of working with people and enthusiasm to LEDwise where he was recently employed as the Business Development Specialist for Cape Town. He describes himself as ‘Eccentric’ and holds a BA in Psychology completed at the University of Free State. Though new to the lighting industry, Pieter has experience in Design and Machine software experience, gained during his time working in the field of Mechanical Engineering.

Pieter was attracted to LEDwise by the pace of the lighting industry as well as the passion of LEDwise founder, Bruce Scott which in turn inspires employees who display commitment to what they do.

peiter

‘The opportunities for this company are limitless, as people listen to each other’s needs’

 

LEDwise has relocated to a bigger, more modern and even more spotless premises in Maitland, Cape Town. 

LEDwise Moves to New Premises!

Our factory and store have white walls and grey epoxy floors, creating a super clean laboratory feel - ideal for assembly of all our electronic and lighting products. The entire factory is equipped with pneumatic air lines and we have a dedicated machining area for cutting and preparing our linear products. Our resin room, where we apply resin to all our IP rated light lines, is air-conditioned ensuring the drying time of the resin is consistent no matter the weather. Our newly built 10m long photometric laboratory is equipped with our gonio-photometer where we generate IES files for all our fittings. Our R&D test room contains our lifetime test racks where we measure lumen depreciation and colour shift of our luminaires to see how they are standing up to the rated lifetimes. We also have a fully equipped showroom and we welcome client visits to our factory.

factory final 2

 If you would like to view our new premises and browse our showroom please contact our team of South African Engineers to arrange a visit. 

We are proud to announce that we have been certified by Dekra for ISO9001:2015 compliance. 

LEDwise awarded ISO9001 Certification

This certification covers the design, manufacture, and assembly of our LED luminaires. We have always prided ourselves on our systems and procedures and having them formally certified was the logical next step to demonstrate to our clients our dedication to quality management. 

ISO JPEG

 If you would like to know more about our quality standards and procedures, contact our team of South African Engineers.

LEDwise Lighting is looking for a Lighting Sales Consultant to join their dynamic professional team.

The successful candidate will need to work closely with our distributors and end clients to promote our LED products for projects and for new business opportunities.

LEDwise are recruiting!

The successful applicant will need to be technically strong and ideally have LED and lighting industry experience with a proven track record of success in specification work and sales.

Core functions will be:

  • Provide product training and updates to our distributors
  • Assist distributors with tender work including preparation of quotations, pricing and documentation
  • Promote our products to Engineering Consultants, Architects, Interior Designers and other end users
  • Prepare sales, training and presentation material
  • Assist key end customers with specification development
  • Investigate new business opportunities
  • Provide advice on new products to add to our portfolio

The role will be based in Cape Town with regional and national travel required.

If you are a self-starter, highly motivated with a desire to work in a dynamic, innovative, professional and innovative company, then please send your CV and motivational letter to bruce@ledwise.co.za

LEDwise has supplied the interior lighting, through distributor Lighting Innovations, for the Church of Scientology Johannesburg North.

LEDwise supplies downlights for Religious Centre

Five of our products were used in different areas of the building including the reception area, cafe, gymnasium, and several conference rooms with a highly impressive outcome. The use of high quality LED luminaires in an already luxurious setting heightens the impact of the surroundings by effectively highlighting the varying textures and colours. In this particular venue, LEDwise luminaires have contributed towards an inviting, interesting and positive atmosphere.

Products used include a range of our diffused products, specifically the CL4H-Diff, CL12-Diff, CL19-Diff and CL24-Diff. These products are fitted with Osram LEDs, white optic reflectors and lumieo diffusers and provide a wide beam ideal for area illumination. Other products include our COB35-RT and COB45-R, which use the Bridgelux Chip on Board LEDs and Tridonic control gear and provide a more focused beam of light, ideal for task illumination or high mounting areas.

 

Conference

Scientology Lead

Gym

Cafe

Reception

Lounge

 Office

 

At LEDwise we pride ourselves in the manufacture and delivery of high-quality, locally produced products. We strive to provide a valuable experience for our clients and will do our best to provide a suitable LED solution.

To view our extensive range of luminaires click here.

For more information on our LED luminaires or to find out how we can assist your business, please contact us on sales@ledwise.co.za or technical@ledwise.co.za

LEDwise has recently added a range of Tri-proof luminaires to our already comprehensive portfolio of products.

LEDwise Product Release – Tri-Proof Luminaire

The IP65 housings are extruded from polycarbonate with injection moulded end caps and an aluminium insert. Initially, we will be supplying them in lengths of 1200mm and power options of 36W and 53W, however other lengths and power options are possible.

The Tri-proofs are fitted with Osram LEDs and Tridonic control gear and come standard with a 5-year warranty. We offer built-in emergency gear, microwave sensor, Dali dimming and corridor function options

Like the rest of our products, the assembly will take place in our local factory in Cape Town. Our production facility operates in accordance with strict quality control standards. We have our own photometric laboratory which is equipped with everything we need to generate IEF files for our products. These files are available on request.

Our Tri-proof range is ideal for parking garages, basements, storerooms and 'back of house' areas.

For more information on our expansive range of luminaires, please contact our team of South African engineers.

The LED industry is constantly changing with new products being introduced all the time and historical bestsellers becoming obsolete. In this type of environment, where historical sales are no longer an indication of future sales, managing your stock is critical to a company’s success.

LEDwise implements MRP software system

LEDwise has introduced a stock management system which allows for the simple and efficient creation of manufacturing Bill of Materials (BOM) and accurate tracking of our stock usage and quantities. With over 120 distinct product types, which can be configured in more than 12,000 combinations, and with more products being added all the time, this type of efficiency means our production team can quickly and efficiently process orders and provide prompt lead time feedback to our clients.

For progress on orders, we encourage our clients to contact our Production Manager directly to avoid communication delays and to get commitments directly from the team that is planning and managing production.

With our world-class production and quality management systems, LEDwise is entrenched as a leading manufacturer of LED luminaires.

Please contact us on info@ledwise.co.za or technical@ledwise.co.za to become your lighting partner on your next project.

 

Through distributor Province Lighting, LEDwise recently supplied parking lights for the Knightsbridge redevelopment office park in Bryanston, Johannesburg. When completed, this prime located office development will boast 29,352sqm of GLA office space and comprise of 7 new buildings.

LEDwise illuminates Knightsbridge Development

The Baton-900, 37W version was chosen as the preferred product for installation by Engineering Consultant WSP. WSP is located in one of the completed buildings at Knightsbridge. The Baton-900 channel light is made from locally extruded aluminum and designed by LEDwise engineers. It is powder coated and fitted with Osram LEDs as well as Tridonic control gear. The channel at the rear of the luminaire allows for an electrical connection to be made without having to open up the fitting. This is advantageous as it reduces any risk of damage during installation while also allowing for the conduit to be mounted directly into the luminaire. For this project, the Baton fitting was also supplied with Tridonic built-in emergency backup gear.

The Baton fitting, available in custom colours, is not only suitable for parking garages but can be used for replacement of open channel fluorescent fittings in storerooms, retail shops, and education facilities. DALI dimmable options are available on request.

LEDwise specializes in applications where lights are utilized for more than 10 hours a day. Durable, efficient and superior quality lighting through LEDwise! Choose us for your next lighting project.

Contact us on info@ledwise.co.za or technical@ledwise.co.za